Sharp LC-19SK25U-W, LC 19SK25U Power Control, Power Management, No signal off, No operation off

Page 32

Basic adjustment settings

Power Control

Power control setting allows you to save energy.

No signal off

When set to “Enable”, the power will automatically shut down if there is no signal for 15 minutes.

1

Press MENU to display the MENU screen, and

then press c/d to select “Power Control”.

 

2

Press a/b to select “No Signal Off”, and then

press ENTER.

 

3

Press a/b to select “Enable”, and then press

ENTER.

 

 

 

 

 

 

 

 

 

 

 

 

 

Enable

 

 

 

 

 

 

 

 

Disable

 

 

 

 

 

 

• Five minutes before the power shuts down, the

 

remaining time displays every minute.

4

Press MENU to exit.

 

•“Disable” is the factory preset value.

•When a TV program fi nishes, this function may not operate.

No operation off

The power will automatically shut down if there is no operation for 30 minutes or 3 hours after setting.

1

Press MENU to display the MENU screen, and

then press c/d to select “Power Control”.

 

2

Press a/b to select “No Operation Off”, and

then press ENTER.

 

3

Press a/b to select “30min” or “3Hour”, and

then press ENTER.

 

 

• Five minutes before the power shuts down, the

 

remaining time displays every minute.

4

Press MENU to exit.

 

• “Disable” is the factory preset value.

Power Management

You can set the TV to automatically power off when no image is displayed on PC.

1

Press MENU and the MENU screen displays.

 

 

 

2

Press c/d to select “Power Control”, and

then press ENTER.

 

 

• Power control menu displays.

3

Press a/b to select “Power Management”,

and then press ENTER.

 

4

Press a/b to select “Mode 1” or “Mode 2”,

and then press ENTER.

 

 

 

 

 

 

 

 

 

 

 

Off

 

 

 

 

 

 

Mode 1

 

 

 

 

 

 

Mode 2

 

 

 

 

 

Selected item

Description

 

 

Off

• No power management

 

• Factory preset value.

 

 

Mode 1

• If no signal inputs for approximately 8

 

minutes, the power shuts down.

 

• Even if you start using the PC and the

 

signal inputs again, the TV stays off.

 

• The TV turns on again by pressing

 

POWER. (See page 17.)

 

 

Mode 2

• If no signal inputs for approximately 8

 

seconds, the power shuts down.

 

• When you start using the PC and the

 

signal inputs again, the TV turns on.

 

• The TV turns on again by pressing

 

POWER. (See page 17.)

 

 

NOTE

•If you turn off the power by disconnecting AC cord when setting “Mode 2” in power management, the TV may not function properly after turning the power on again. In such case, press POWER on the remote control unit.

•Pressing POWER on the display will have the same result.

•In Mode1, fi ve minutes before the preset of time expires, the remaining time displays each minute.

30

Page 31 Page 33
Image 32
Page 31 Page 33
Contents LC-19SK25U LC-19SK25U-W Dimensional drawings LC-19SK25U LC-19SK25U-W Trademarks Important Safety Instructions Important Safety Instructions Electric Service Grounding Conductors Equipment Child Safety Supplied accessories Before using the TV unitAttaching the stand Confi rm the 3 screws supplied with the TVVentilation & Cleaning Tips Television. See Press Power on televisionPower indicator on the front of the television lights Green Attach your antenna to the backClose the battery cover Quick ReferenceContents Part names TV FrontTV Side/Rear Regarding the headphone jackRemote control unit Favorite CHKitchen Remote control unit PowerCHr/CHs VOL+Antennas Using the remote control unitPreparation Connecting a VCR, game console or camcorder Using Digital Audio OutputWhen using S-VIDEO cable commercially available When using component cable. InputConnecting Hdmi equipment Connecting a PCPC compatibility chart When connecting to a PC with an analog RGB terminal. InputTurning on the power Turning off the powerTV status indicator Power TV status indicator OPCInitial setup Channel search Language settingAntenna setting ExampleMethod Simple button operations for changing channelsDisplaying the receiving channel information Simple button operations for changing volume/sound Changing the volumeUsing VOLk/l Press MuteIf stereo sound is difficult to hear Setting MTS/SAP stereo modeSetting Digital broadcasting audio mode Basic adjustment settings Using the control panel of the main unitMenu operation buttons On-Screen DisplayMenu items for TV/INPUT 1/2 Menu items for HDMI/PC-IN OPCWhen Air/Cable has been selected Antenna setting and then press EnterChannel Setup When Air /Cable is selected in AntennaChannel memory setting When viewing Analog broadcastsWhen viewing Digital broadcasts Antenna Setup DigitalFavorite channel setting Favorite channel Picture adjustments OPC indicatorAdvanced picture settings Film ModeSound adjustment Then press c/d to select AudioCbutton Dbutton Treble BassPower Control Power ManagementNo signal off No operation offUsing external equipment Displaying an external equipment imageInput on the remote control unit or on Displaying an image from Hdmi equipmentPress a/b to select Hdmi Audio Select or Hdmi Auto View , and then press EnterFine Sync. Adjustment Useful adjustment settingsAuto Sync. Adjustment for Analog PC input mode only Setting the Rotate on the Menu screen Picture RotateYou can set the orientation of the picture Press a/b to select Rotate, and then pressLanguage setting Reset Image positionInput Label Sleep Timer View Mode for 43 Programs View Mode for HD Programs Press View ModePress View Mode or a/b while the View Mode menu is displayed to select a desiredView Mode for PC input mode View Mode menu displays ExampleYou can select the screen size Stretch Dot by DotAdvanced Option settings Press a/b to select Audio Service or To access Audio Service or AudioAudio PREFERENCE, and press Enter Preference screenInput Signal for Analog PC input mode only TV INPUT1/2 modeINPUT4 PC mode Example Displayed on the screen disappearsExamples Closed Captions and Digital Closed CaptionsIs still on the screen Digital Caption Setup When viewing a digital channelSecret number setting for parental control Setting parental control statusSetting a secret number NumberInput the old 4-digit secret number by using Changing the secret numberPress a/b to select New Secret No., Clearing the secret numberParental control setting V-CHIP level Voluntary movie rating system MpaaTV Parental Guidelines Rating DescriptionTV Parental Guidelines TV Guidelines Rating system MpaaCanadian French ratings Canadian Rating SystemsCanadian English ratings How to temporarily release Reactivating the temporarily released V-CHIP BlockCanadian English ratings Canadian French ratings RatingsFreezing images Press Freeze again to cancel the functionOther viewing options Using the kitchen remote control unit Please use AA alkaline batteries for long timePress Kitchen TIMER/CLOCK SET Clock setAlarm setAlarm off BacklightTroubleshooting Troubleshooting-Digital broadcastingError message about reception of broadcast AppendixSpecifications Model LC-19SK25U/LC-19SK25U-WSecret number is Input screen displaysCleared. appears on the screen Information on the software license for this product Software compositionSoftware developed by Sharp and open source software Obtaining source code
Top Page Image Contents