Sharp LC-19LE520X Attaching the stand, Setting the TV, Connecting the antenna cable

Attaching the stand

•Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.

•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

1Confi rm the screws supplied with the TV.

Screws (m3) (used in step 3)

2Insert the stand base to the stand post on the bottom of the TV. (1)

3Insert and tighten the 3 screws into the 3 holes on the bottom of the stand base. (2)

NOTE

• To detach the stand, perform the steps in reverse order.

Soft cushion

Screw

Screw driver

Setting the TV

Connecting the antenna cable

To enjoy a clearer picture, use an outdoor antenna.

Connecting the AC cord

To AC INPUT terminal

Standard DIN45325 plug (IEC169-2)

75-ohm coaxial cable (round cable)

Antenna cable (commercially available)

To antenna

Room antenna terminalterminal (75-ohm type)

CAUTION

•TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD CONNECTED.

3