Sharp LC-22LE250K Power Source, Power Cord, Moisture and Water, Cleaning, Ventilation, Lightning

Page 6
Power Source

Safety Precautions

Read the following recommended safety precautions carefully for your safety.

Power Source

The TV set should be operated only from a 220-240V AC, 50Hz outlet. Ensure that you select the correct voltage setting for your convenience.

Power Cord

Do not place the set, a piece of furniture, etc. on the power cord (mains lead) or pinch the cord. Handle the power cord by the plug. Do not unplug the appliance by pulling from the power cord and never touch the power cord with wet hands as this could cause a short circuit or electric shock. Never make a knot in the cord or tie it with other cords. The power cords should be placed in such a way that they are not likely to be stepped on. A damaged power cord can cause fire or give you an electric shock. When it is damaged and needs to be replaced, it should be done by qualified personnel.

Moisture and Water

Do not use this device in a humid and damp place (avoid the bathroom, the sink in the kitchen, and near the washing machine). Do not expose this device to rain or water, as this may be dangerous and do not place objects filled with liquids, such as flower vases, on top. Avoid from dripping or splashing.

If any solid object or liquid falls into the cabinet, unplug the TV and have it checked by qualified personnel before operating it any further.

Cleaning

Before cleaning, unplug the TV set from the wall outlet. Do not use liquid or aerosol cleaners. Use soft and dry cloth.

Ventilation

The slots and openings on the TV set

are intended for ventilation and to ensure reliable operation. To prevent overheating, these openings must not be blocked or covered in anyway.

Heat and Flames

The set should not be placed near to open flames and sources of intense heat such as an electric heater. Ensure that no open flame sources, such as lighted candles, are placed on top of the TV. Batteries should not be exposed to excessive heat such as sunshine, fire or the like.

Lightning

In case of storm and lightning or when going on holiday, disconnect the power cord from the wall outlet.

Replacement Parts

When replacement parts are required, make sure that the service technician has used replacement parts, which are specified by the manufacturer or have the same specifications as the original one. Unauthorized substitutions may result in fire, electrical shock or other hazards.

Servicing

Please refer all servicing to qualified personnel. Do not remove the cover yourself as this may result in an electric shock.

Waste Disposal

Packaging and packaging aids are recyclable and should principally be recycled. Packaging materials, such as a foil bag should be kept away from children

Batteries, including those which are heavy metal free, should not be disposed of with household waste. Please dispose of used batteries in an environmentally friendly manner. Find out about the legal regulations which apply in your area.

Do not try to recharge batteries, there is a danger of explosion. Replace batteries only with the same or equivalent type.

This symbol on the product or on its packaging means that your electrical and electronic device

should be disposed at the end of its service life separately from your household wastes. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or the dealer where you purchased the product.

Disconnecting the Device

The mains plug is used to disconnect the TV set from the mains and therefore it must remain readily operable.

Headphone Volume

Excessive sound pressure from earphones and headphones can cause hearing loss.

Installation

To prevent injury, this device must be securely attached to the wall in accordance with the installation instructions when mounted to the wall (if the option is available).

English - 5 -

Image 6
Contents LC-22LE250K LCD COLOUR TELEVISIONOPERATION MANUAL ENGLISHContents Blue Neutral Brown Live SPECIAL NOTE FOR USERS IN THE U.KDANGER IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIANFeatures Dear SHARP customerIntroduction Important safety precautions Precautions when transporting the TVCleaning Power SourcePower Cord Replacement PartsLCD Screen Electrical device not in the hands of childrenPackage Contents Environmental InformationRepair Information Standby Notifications Connect PowerViewing the TV TV Control button & Operation Inserting the Batteries into the RemoteNotification SpecificationAntenna/Cable Connection TRADEMARK ACKNOWLEDGMENTUsing My Button Viewing remote controlUsing My button TeletextViewing the Connections AV Connection Cable suppliedPC to YPbPr Connection Cable Not supplied To Switch the TV Off To Switch the TV OnTo Switch the TV to Standby Aerial InstallationTimeshift Recording Recording ConfigurationSlow Forward Instant RecordingQuick Menu Advanced Settings TV Menu Features and FunctionsPicture Menu Contents Skin tone can be changed between -5 andOther Settings Displays other setting options of the TV set Sound Menu ContentsSettings Menu Contents VolumeClear Service List Install and Retune Menu ContentsPower Up Mode Hard of HearingUsing the Channel List Software upgrade search via user interface3 AM search and upgrade mode Configuring Parental SettingsTv will not turn on Remote control - does not operateTroubleshooting & Tips Poor pictureSupported File Formats for USB Mode AV and HDMI Signal CompatibilityPC Input Typical Display Modes PhotoDimensional Drawings End of life disposal Installing the Stand Installing the Stand1. Sharp Television 2. Stand Cover 3. Stand Uninstalling the Stand Uninstalling the StandScrew Dimensions Wall Mounting Screw length = A+B Screw50232539