Important Safety Instructions

Read before operating equipment

1, Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with a dry cloth.

7.Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.

8,	Do not install near any heat sources such as radiators, heat registers,
	stoves, or other apparatus (including amplifiers) that produce heat.
g,	Do not defeat the safety purpose of the polarized or grounding type
	plug. A polarized plug has two	blades with	one wider than the other.
	A grounding type plug has two	blades and	a third grounding prong.
	The wide blade or third prong	are provided	for your safety. When the
	provided plug does not fit into your outlet, consult an electrician for
	replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with a cart, stand, tripod, bracket, or table specified by

the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as if the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, or if the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15.This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic industries Alliance (www.eiae.org).

16.Damage Requiring Service - The appliance should be serviced by qualified service personnel when:

A.The power supply cord or the plug has been damaged;

B.Objects have fallen or liquid has been spilled into the appliance;

C.The appliance has been exposed to rain;

D.The appliance does not appear to operate normally or exhibits a marked change in performance;

E.The appliance has been dropped or the enclosure damaged.

17.TUt/Stability - All televisions must comply with recommended international global safety standards for tilt and stability proper ties of its cabinet design.

•Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet, which could ultimately overturn the product.

•Also, do not endanger yourself, or children, by placing electronic equipment/toys on the top of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product damage and/or personal injury.

18.Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.

19.Power Lines - An outdoor antenna should be located away from power lines.

20.Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges.

Section 810 of the National Electrical Code, ANSI/NFPA No. 70- 1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding connectors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure below.

21.Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

22.Battery usage CAUTION - To prevent battery leakage that may result in bodily injury, property damage, or damage to the unit:

•Install all batteries correctly, with + and - aligned as marked on the unit.

•Do not mix batteries (old and new or carbon and alkaline, etc.).

•Remove batteries when the unit is not used for a long time.

23.Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Note to the Cable "IV system installer: This reminder is provided to call the Cable TV system installer's attention to Article 820-40 of the NEC (Section 54 of the Canadian Electrical Code, Part 1)that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Example of Antenna Grounding

as per NEC - National Electrical Code

GROUND

CLAMP

ANTENNA

LEAD IN WIRE

ELECTRIC SERVICE EQUIPMENT

ANTENNA DISCHARGE [NIT tNEC SECTION 810-20)

GRO[ NDING COND[ CTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM

iNEC ART 250, PART H)

CRT Television specifications

The TTE Technology CRT Television represents a significant era in video display technology, known for its robust image reproduction and reliability. Although it is largely overshadowed by modern flat-screen displays, the CRT (Cathode Ray Tube) television holds a unique place in the hearts of many. TTE Technology has been a notable player in the CRT market, offering televisions that exemplify the classic characteristics of the technology.

One of the main features of TTE Technology CRT Televisions is their high-quality picture clarity. These televisions utilize a cathode ray tube, which generates images by directing electron beams onto a phosphorescent screen. This process produces vivid colors and deep blacks, giving a lifelike feel to images. Many users appreciate the rich color saturation and contrast that CRTs can provide, especially in darker scenes.

Another hallmark of TTE CRT Televisions is their durability and long lifespan. Unlike many modern displays, which can suffer from issues like dead pixels or burn-in, CRTs are generally capable of withstanding years of use without significant deterioration in image quality. This longevity makes them a preferred choice for those looking for a reliable viewing option.

TTE Technology CRT Televisions also offer various screen sizes, typically ranging from 14 to 36 inches. This variety allows users to select a size that fits their viewing environment without the need for overwhelming space. The compact design of CRT televisions makes them suitable for smaller rooms or locations where space is limited.

One notable technological characteristic of TTE CRT Televisions is the cathode ray tube's ability to display various resolutions and aspect ratios. While many flat screens have fixed resolutions and aspect ratios, CRTs can adapt to different content formats, accommodating both standard definition and various high-definition signals, although the latter may not exhibit the same level of quality as modern displays.

In addition to their visual characteristics, TTE CRT Televisions are also appreciated for their sound quality. Many models come equipped with built-in speakers that deliver robust sound, creating an immersive experience for viewers.

While they may not feature the smart capabilities of contemporary televisions, TTE Technology CRT Televisions are celebrated for their nostalgic charm, vivid image quality, and lasting durability. For enthusiasts and collectors, these televisions represent a unique connection to a time when viewing experiences were defined by the technology of the cathode ray tube.