Watching TV
Auto Ch Memory
Auto Ch Memory makes the TV/DVD look for all channels viewable in the set area.
1Press TV MENU and the MENU screen displays.
2Press ▲/▼ to select “Channel”, then press ▶ or ENTER. Press ▲/▼ to select “Auto Ch Memory”, then press ▶ or
ENTER.
3Press ▲/▼ to select “Signal Type”, then press ◀/▶ to select “Cable” or “Air”.
4Press ▲/▼ to select “Automatic Search”, then press ▶ or
ENTER.
5The TV will begin memorizing all the channels available in your area.
•It may take from 15 minutes to 30 minutes to complete memorizing digital cable channels.
Depending on the reception condition, a bar display may not advance for several minutes, please be patient.
NOTE
•Memorizing channels is best accomplished during evening “PRIMETIME” hours, as more stations are broadcasting digital signals. Memorizing channels can only be accomplished while a station is broadcasting a digital signal to set that channel into memory.
•New digital channels may be added to your area periodically, it is recommended to perform the “Automatic Search” procedure regularly.
Skipping stored channel
You can set channel selection disabled using CH
/
.
1Press TV MENU and the MENU screen displays.
2Press ▲/▼ to select “Channel”, then press ▶ or ENTER.
3Press ▲/▼ to select “Add/Delete”, then press ▶ or
ENTER.
4Press ▲/▼ to select “Add/Delete”, then press ▶ or
ENTER.
5Press ▲/▼ to select the channel that you want to skip.
6Press ◀/▶ to select “Delete” for selected channel.
7Press EXIT to return to the normal screen.
NOTE
•To add a digital channel you are watching:
Select a channel you want to add. Then select “Adding Channel” in step 4, press ▶ or ENTER.
•To release the skipping channel: Select “Add” in step 6.
Clear All
All channels are deleted from the channel memory.
1Press TV MENU and the MENU screen displays.
2Press ▲/▼ to select “Channel”, then press ▶ or ENTER.
3Press ▲/▼ to select “Add/Delete”, then press ▶ or
ENTER.
4Press ▲/▼ to select “Clear All”, then press ▶ or ENTER.
5Press EXIT to return to the normal screen.
Display the channel information
Press DISPLAY to display the current channel (or input source) information on the screen.
When the TV receives a digital signal, the digital information will appear for a few seconds.
• | Channel number |
| • Station name |
• | Channel label (if preset) • Broadcast program name | ||
• |
| • Signal type | |
• | Sleep timer |
| • Audio language |
• | Program guide |
| • Picture size |
• | Resolution |
|
|
When the TV receives an analog signal, the analog | |||
information will appear. |
| ||
• | Channel number | • | Channel label (if preset) |
• | • | Signal type | |
• | Sleep timer | • | Audio information (Stereo, SAP or Mono) |
• | Picture size | • | Resolution |
|
| • | Broadcast program name |
Setting MTS/SAP stereo mode
The TV/DVD has a feature that allows reception of sound other than the main audio for the program. This feature is called
You can enjoy
• Stereo broadcasts
View programs like live sporting events, shows and concerts in dynamic stereo sound.
• SAP broadcasts
Receive TV broadcasts in either MAIN or SAP sound. MAIN sound: The normal program soundtrack (either in mono or stereo).
SAP sound: Listen to a second language, supplementary commentary or other information. (SAP is mono sound.)
If stereo sound is difficult to hear.
• Obtain a clearer sound by manually switching to fixed
NOTE
•MTS only operates while in TV mode.
•MTS is available only when receiving analog broadcasting, not when receiving digital broadcasting.
•When the TV receives a stereo or SAP broadcast, the word “Stereo” or “SAP” displays
DISPLAY.
Changing MTS
You can change MTS as shown below to match the television broadcast signal.
1In analog TV mode, press AUDIO and the “Audio” menu screen displays. “MTS” will be highlighted.
2Press AUDIO again or ◀/▶ to select “Stereo”, “SAP” or “Mono”.
3Press EXIT to return to the normal screen.
21