Sharp LC-19DV28UT operation manual TV Input1 Input2 DVD Input3

Standard

Quality

AUDIO

DVI OUT

Input Select

Displaying an External Equipment Image

To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV/DVD.

NOTE

• For information on updating to HD programming, ask your cable/satellite service provider.

1 Press INPUT.

• A list of selectable sources appears.

2 Press 0-5to select the input source.

• Each time INPUT is pressed, the input source toggles.

⇒ Page 17

Audio cable

AV cable

⇒ Page 17

Audio cable

S-VIDEO cable

⇒ Page 17

Component video cable

Ø 3.5 mm stereo minijack cable

⇒Page 16

DVI-HDMI conversion cable

HDMI-certified cable

⇒Page 16

Terminal on the TV

Cable

Image quality differs depending on the terminal used. To enjoy clearer images, check the output terminals of your external equipment and use its appropriate terminals for higher quality images.

• The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products.

Image Terminal on external

Quality equipment

HD Quality

Using external equipment

Experiencing HD images

An HDTV without an HD source is just an ordinary TV/DVD.

To enjoy HD images on the TV/DVD, you should get HD programming from the following:

• Over-the-air broadcasting via HD quality antenna

• HD cable/satellite subscription

• HD compatible external equipment

NOTE

• For information on updating to HD programming, ask your cable/satellite service provider.

Types of Connection

0.TV

1.Input1

2.Input2

3.Input3

4.Input4

5.DVD

[0-5]:Select

TV Input1 Input2

DVD Input3

•You can also select the input source by pressing ▲/▼.

•An image from the selected source automatically displays.

15