VIRTUAL SURROUND
You can enjoy
1Hit [MODE] twice (CD: once) during play- back.
OFF
2Hit [ENTER] to set it “1” (Natural effect), “2” (Emphasized effect) or “OFF”.
3Hit [MODE] to exit.
¡You can also exit the menu by hitting [RETURN].
NOTE: (for CD play only)
¡Virtual Surround will not be effective if the sound mode is set to something other than STEREO.
THE ON-SCREEN INFORMATION
You can check the information about the current disc by hitting [DISPLAY].
For
1Hit [DISPLAY] during playback to show cur-
For Audio CDs
1Hit [DISPLAY] during playback to show the
rent Chapter.
¡The elapsed and remaining playing time of the current chapter will be displayed.
9/49 0:00:00
current Track.
¡The elapsed and remaining playing time of the cur- rent track will be displayed.
4/12 0:03:21 - 0:02:15 T
2Hit [DISPLAY] again to show current Title.
¡The elapsed and remaining playing time of the current title will be displayed.
3Hit [DISPLAY] again.
1/3
¡The bit rate and the currentT L1 repeat setting will be
displayed.
¡If you are playing a dual layered disc, the layer number will also be displayed (L0: Layer 0 is play- ing. L1: Layer 1 is playing).
4Hit [DISPLAY] again to exit.
Track.
¡The elapsed and remaining playing time of the total
track will be displayed. |
|
4/12 0:13:45 - 0:45:40 T |
3Hit [DISPLAY] again to exit.
NOTE:
¡When you are playing a disc in PROGRAM or RANDOM mode, “ PROGRAM” (or RAN- DOM) will be displayed at step 2.
PROGRAMB
- 25 - | EN |