Sansui SLED2400 owner manual How to attach the stand, How to remove the stand

Page 6

How to attach the stand

NOTE:

•Unplug the AC cord.

•Before beginning this process, assure that the TV is laid on a clean, safe, and cushioned surface to avoid any damage to the unit.

•Do not touch or press the TV-screen, glass might break under pressure.

Place the TV on its front onto a table.

Align the stand’s bottom-plate (supplied) as seen here.

It will ﬁt in only one direction.

Hold the unit and attach the stand slowly, as shown in Figure 1.

LCD PANEL FRONT

Figure 1

Figure 2

Finally secure the bottom-plate with 3 screws (supplied) (4x16mm(5/32 x 5/8 inches)) as indicated by the arrows in Figure 2.

• Be sure to follow the instructions. Insufficient tightening or incorrect installation of the stand will not support your unit correctly, and could result in damage or injury from tip-over.

How to remove the stand

When you transport this product, remove the stand and pack ﬂat against the back of the unit in the carton. To remove the stand, perform these steps in reverse order.

For wall mounting, the base must be removed. To disconnect the base/stand remove the three (3) screws from the back (see page 5).

EN 6

Image 6

Contents Customer Service SERVICE/SERVICE Clientèle Orion Website Site WEB OrionPart On the rear of the unit Voltage surges and built-up static Wire to an antenna discharge unit, size To provide some protection against Charges, of the NationalTune Into Safety Child SafetyIssue This Manufacturer CaresHOW to Handle the LCD Panel CondensationHow to attach the stand How to remove the standFeatures Power sourceTo USE AC Power Source Contents Right Side Parts and functionsFront RearBattery Precautions Antenna connections Cable TV connectionsTo connect the TV to a camcorder, or a game console Connections to other equipmentTo connect the TV to a VCR Right of the unitTo connect the TV to a PC Personal Computer Using an AV Amplifier with built-in digital surroundTo return to normal mode Rear and right of the unitTo connect a Hdmi or a DVI device to the unit Hdmi type a connectorTo HDMI/DVI in not supplied Hdmi cable type a connector To Hdmi outputStarting setup TV operationTo select the video input source Quick guide for menu operation Icon Selected Items Setup hint Convenience functionsMemorizing channels Labeling video inputs Checking the digital signal strengthLabeling channels To create channel labelsHow to enter the V-Chip menu Setting the V-ChipTo register a password To change the passwordTo clear the all V-Chip settings Closed CaptionCC advanced Natural Setting the picture sizeSelecting the picture size Cinema Wide3 for letter box programs with subtitlesTime Shift PreparationPlug-in an external storage device into USB port Reception disturbances IgnitionTroubleshooting Block Noise / Picture FreezeSpecifications AccessoriesGeneral Orion SALES, INC 3471 N. Union DR