Labeling channels
Channel label appear with the channel number display each time you turn on the TV, select a channel, or press DISPLAY.
You can choose any 7 characters to identify a channel.
To create channel labels
1 Select “Channel ⇒ Channel Number”.
2 Press ◀ or ▶ to select a channel you want to label, then press ▼ to select “Channel Label”. Then press ▶ or ENTER.
Picture | Sound | Time | Setup | Lock | Channel |
Air/Cable |
|
| Cable |
|
|
Auto Scan |
|
|
|
|
|
Channel List |
|
|
|
|
|
Show/Hide |
|
|
|
|
|
Channel Number |
| 23 |
|
| |
Channel Label |
|
|
| ||
3 Press ▲ or ▼ repeatedly until the character you want appears in the first space.
Picture | Sound | Time | Setup | Lock | Channel |
C H 
3
If the character which you desire appears, press ▶. You can also change the position which input character by pressing ◀ or ▶.
Repeat this step to enter the rest of the characters.
4 Repeat steps
5 When you finish inputting the label name, press EXIT to return to the normal screen.
NOTE:
• The channel labels will be reset after “Auto Scan” on page 20.
Setting the Lock
An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to “TV” and “MPAA” if this data is transmitted.You may set this restriction separately. To use the
Lock function, you must register a password.
To register a password
1 Select “Lock”, then press ▼.
2 Press 0000 using Number
Picture | Sound | Time | Setup | Lock | Channel |
Enter Password
“
” appears instead of the number.
NOTE:
• If you forget the password, contact Customer Service at
• To avoid forgetting the password, write it down and keep in a safe place.
How to enter the Lock menu
1 Select “Lock” menu, then press ▼.
2 Use Number buttons
To Lock connected devices
1 In the Lock menu, press ◀ or ▶ to set “System Lock” to “On”.
2 Press ▲ or ▼ to select “Input Block”, then press ▶ or ENTER.
Picture | Sound | Time | Setup |
| Lock | Channel |
|
|
|
|
|
|
|
TV |
|
| UnBlock |
|
| |
AV |
|
| UnBlock |
|
| |
Component |
|
| UnBlock |
|
| |
HDMI1 |
|
| UnBlock |
|
| |
HDMI2 |
|
| UnBlock |
|
| |
PC |
|
| UnBlock |
|
| |
Media |
|
| UnBlock |
|
| |
3 Press ▲ or ▼ to select which device will be blocked, then press ◀ or ▶ to select “Block”.
NOTE:
• Blocked device will appear in Source Select window. Enter your password before watching.
If you want to use such a device again, you should setting “UnBlock” in step 3.