–
VCR
DVD
DTV
SAT
CBL
HD
: Uses the default label name
: Video cassette recorder
: DVD video
: Digital TV set-top box
: Satellite box
: Cable box
: HDMI device (only for HDMI inputs)
: Select
: Adjust
HDMI3
-
HDMI2
-
HDMI1
-
Component
-
Video2
-
Video1
-
Video Label
Press ◀ or ▶ to select the desired label for that input source.
Press ▲ or ▼ to select an input which you want to label.
Select “Setup”, then press ▶ or ENTER.
Press ▲ or ▼ to select “Video Label”, then press ▶ or ENTER.
The Video Label feature allows you to label each input source for your TV.
1
2
3
4
Labeling video inputs
To clear a Ch Label
After step 3 above, press ▲ or ▼ to select “Label Clear”, then press ▶ or ENTER.
NOTE:
• The channel labels will be reset after “Automatic Search” on page 18.
Repeat steps 3-4 for other channel.You can assign a label to each channel.
When you finish inputting the label name, press EXIT to return to the normal screen.
5
6
SPACE
If the character which you desire appears, press
ENTER.
Repeat this step to enter the rest of the characters. If you would like a blank space in the label name, you must choose the empty space from the list of characters.
The characters rotation as follows:
ENTER:Set
: Select
: Adjust
>>
Label Clear
A
Ch Label
Ch Label Channel Number
Press ◀ or ▶ repeatedly until the character you want appears in the first space.
4
: Select : Adjust
Label Clear
>>
Ch Label
Ch Label
Channel Number 15-1
Labeling channels
Channel label appear with the channel number display each time you turn on the TV, select a channel, or press DISPLAY.
You can choose any four characters to identify a channel.
NOTE:
• Signal meter feature is not available for analog channels.
• After 240 seconds, DTV Signal screen will return to normal TV-operation automatically.
Signal Level
0
50100
DTV Signal
This TV will allow you to view the digital signal meter for digital channels.
1 Select “Channel”, then press ▶ or ENTER.
2 Press ▲ or ▼ to select “DTV Signal”.
3 Press ▶ or ENTER to check the digital signal strength.
The digital signal strength screen will appear.
If necessary, adjust the direction of the antenna to obtain the maximum signal strength.
Checking the digital signal strength
ENTER:Set
: Select
Clear All
>>
Add/Delete
>>
Adding Channel
>>
Add/Delete
Press ▲ or ▼ to select “Clear All”, then press ▶ or
ENTER.
Press ▲ or ▼ to select “Add/Delete”, then press ▶ or ENTER.
All channels are deleted from the channel memory. 1 Select “Channel”, then press ▶ or ENTER.
2
3
Clear All
To create channel labels
1 Select “Channel”, then press ▶ or ENTER.
2 Press ▲ or ▼ to select “Ch Label”, then press ▶ or ENTER.
The Ch Label menu will appear.
3 Press ◀ or ▶ to select a channel you want to label, then press ▼.
ENGLISH
19