Sansui SLED4280, SLED4680 owner manual How to attach the stand, How to remove the stand

Page 6

How to attach the stand

NOTE:

Unplug the AC cord from the AC outlet.

Ensure that unpacking and transfer of the unit is carried out by two or more people.

Before beginning this process, assure that the TV is laid on a clean, safe, and cushioned surface to avoid any damage to the unit.

Do not touch or press the TV-screen, glass might break under pressure.

Place the TV on its front onto a table.

Align the stand’s bottom-plate (supplied) as seen here.

It will fit in only one direction.

Hold the unit and attach the stand slowly, as shown in Figure 1.

LCD PANEL SIDE

Figure 1

Illustration is SLED4280

Figure 2

Finally secure the bottom-plate with 4 screws (supplied) as indicated by the arrows in Figure 2.

• Be sure to follow the instructions. Insufficient tightening or incorrect installation of the stand will not support your unit correctly, and could result in damage or injury from tip-over.

How to remove the stand

When you transport this product, remove the stand and pack flat against the back of the unit in the carton. To remove the stand, perform these steps in reverse order.

For wall mounting, the base must be removed. To disconnect the base/stand remove the 4 screws from the back (see page 5).

6

Image 6
Contents Customer Service SERVICE/SERVICE Clientèle Orion Website Site WEB OrionEnglish Location of the required MarkingVoltage surges and built-up static Wire to an antenna discharge unit, sizeTo provide some protection against Charges, of the NationalTune Into Safety Child SafetyIssue This Manufacturer CaresHOW to Handle the LCD Panel CondensationHow to attach the stand How to remove the standTo USE AC Power FeaturesPower source Connect the AC cord into an AC outletContents Rear Parts and functionsFront CH ChannelBattery Precautions Remote controlPower Button Used to turn the power on/off to the LCD TV Picture Size Button Used to change the picture sizeAntenna connections Cable TV connectionsTo connect the LCD TV to a camcorder, or a TV Game Connections to other equipmentTo connect the LCD TV to a VCR DVDUsing an AV Amplifier with built-in digital surround To connect an audio systemRear of the unitSubwoofer Speaker Right To DVI output To connect the LCD TV to a Hdmi or a DVI device to the unitRight and rear of the unit Audio cord not supplied To PC/DVITV operation To select the video input sourceQuick guide for menu operation EnterIcon Selected Items Setup hint Convenience functionsAutomatic Search Memorizing channelsAir/Cable selection Adding ChannelTo create channel labels To change the password Setting the V-ChipTo register a password To set the V-ChipCC advanced To clear the all V-Chip settingsClosed Caption CaptionSetting the picture size Reception disturbances IgnitionTroubleshooting Block Noise / Picture FreezeSLED4280 SLED4680 SpecificationsAccessories GeneralThis warranty does not cover Orion SALES, INC N. Union DRMemo