Sansui HDLCD5050 Time Shift, Preparation, Plug-in an external storage device into USB port

Page 23

Time Shift

You can record a digital program by using the USB memory drive. This function is for your convenience, and allows you to pause/record a live program for a period of time based on the size of the USB drive inserted.

Note: The connected USB device must;

• Have a minimum approx. 100 MB of memory (32 GB max.).

• Formatted as FAT16/32.

• Have a write speed higher than 40Mb/sec.

• Contain no other files.

• Do not use USB extension cable.

Preparation:

Plug-in an external storage device into USB port.

To start recording, press (PAUSE). The recording will start and the picture will be paused.

To view a live program, press ■ (STOP).

The paused picture goes back to a live program and recording continues.

To stop recording, press ■ (STOP) again during viewing a live program with recording.

To start playback, press (PLAY). The recorded program starts playback.

If you want to watch the program while recording, press (PLAY).

You can watch the recorded program while recording the current program.

To pause the playback picture, press (PAUSE).

To stop the playback, press (STOP).

To fast forward or fast reverse, press (SKIP–) or (SKIP+).

USB status display

Press DISPLAY while watching a DTV channel, or press the Time Shift operation buttons. The status display will appear.

Playback status :

(PLAY), (STOP), (PAUSE), (SKIP+), (SKIP-)

 

Delayed time from the current program

 

or Playing time in the play mode.

Recording

• If there are no recorded program in

the USB memory, --:--:-- will appear

USB Memory Information

Delay Time : 00:02:09 Message: Now Play View

 

 

 

 

Message display

 

Now Live View... Viewing live program

Now Play View... Viewing recorded program

Now Pause View... Pausing the program

Not Available... Inhibited function

USB Memory is full...Caution of available USB memory

 

less than 100MB (Insufficient USB free space...will show

 

when

 

(PAUSE) is pressed.)

(PLAY) and there are no

• No Data... When you press

 

data recorded in the USB memory

• USB Memory is unplugged... USB memory is not connected

To delete the recorded program Disconnect the USB memory, record another program, or turn off the TV.

Note:

• Time shift does not work for ATV or external inputs. If you change the signal while recording a program (Live View), recording will stop.

• During Play view mode, ATV channel select or input select will not work.

• Time shift recordable time is approximately 10 minutes per 1 GB for HD or 30 minutes for SD (depending on the program).

• You cannot watch the recorded program on a PC or other device.

• All of the USB memory may not able to be used.

• We will accept no responsibility whatsoever for loss of files on USB devices caused by connection to this unit.

23EN

Image 23
Contents SERVICE/SERVICE Clientèle Orion Website Site WEB Orion Customer ServiceFCC Declaration of Conformity Compliance Statement Part Disposal should be in compliance with local, stateOn the rear of the unit Or federal lawsCharges, of the National Wire to an antenna discharge unit, sizeTo provide some protection against Voltage surges and built-up staticThis Manufacturer Cares Child SafetyIssue Tune Into SafetyCondensation HOW to Handle the LCD PanelLCD Panel Side How to attach the standHow to remove the stand To USE AC Power FeaturesPower source Contents Rear Parts and functionsFront Left sideCH Channel / Buttons To change Remote controlBattery Precautions Picture Size Button Use to change the picture sizeCable TV connections Antenna connectionsVCR Connections to other equipmentTo connect the TV to a VCR To connect the TV to a camcorder, or a game consoleRear of the unitRight Using an AV Amplifier with built-in digital surroundTo connect an audio system Rear and Left of the unit Monitor Display modes To connect a Hdmi or a DVI device to the unitTo connect the TV to a PC Personal Computer Rear and Left of the unitTo select the video input source TV operationPress MENU. The TV menu screen will appear Quick guide for menu operationChannel number Station name Channel numberConvenience functions Selected Items Setup hintMemorizing channels To create channel labels Checking the digital signal strengthLabeling channels Labeling video inputsTo change the password Setting the V-ChipTo register a password How to enter the V-Chip menuCC advanced To clear the all V-Chip settingsThis feature is designed to customize Digital Caption only Setting the picture size Plug-in an external storage device into USB port Time ShiftPreparation Ignition Reception disturbancesBlock Noise / Picture Freeze TroubleshootingGeneral SpecificationsAccessories OLNEY, Illinois Orion SALES, INC3471 N. Union DR