Sansui SLED5000 owner manual Labeling channels, Setting the V-Chip

Labeling channels

Channel label appear with the channel number display each time you turn on the TV, select a channel, or press DISPLAY.

You can choose any 7 characters to identify a channel.

To create channel labels

1 Select “Channel ⇒ Channel Number”.

2 Press ◀ or ▶ to select a channel you want to label, then press ▼ to select “Channel Label”. Then press ▶ or ENTER.

Picture	Sound	Time	Setup	Lock	Channel
Air/Cable			Cable
Automatic Search
Channel List
Show/Hide
Channel Number			23
Channel Label			CH-2

3 Press ▲ or ▼ repeatedly until the character you want appears in the first space.

Picture Sound Time Setup Lock Channel

C H 3

If the character which you desire appears, press ▶. You can also change the position which input character by pressing ◀ or ▶.

Repeat this step to enter the rest of the characters.

4 Repeat steps 2-3 for other channel.You can assign a label to each channel.

5 When you finish inputting the label name, press EXIT to return to the normal screen.

NOTE:

• The channel labels will be reset after “Automatic Search” on page 20.

Setting the V-Chip

An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to “TV Rating” and “Movie Rating” if this data is transmitted. You may set this restriction separately. To use the V-Chip function, you must register a password.

To register a password

1 Select “Lock”, then press ▼.

2 Press 0000 using Number buttons(0-9). (This is default password.)

Picture Sound Time Setup Lock Channel

Enter Password

“” appears instead of the number.

NOTE:

• If you forget the password, contact Customer Service at 1-800-289-0980 for assistance. Your original remote control will be required.

• To avoid forgetting the password, write it down and keep in a safe place.

How to enter the V-Chip menu

1 Select “Lock” menu, then press ▼.

2 Use Number buttons (0-9) to enter your password.

To V-Chip connected devices

1 In the Lock menu, press ▲ or ▼ to select “V-Chip”, then press ◀ or ▶ to set to “On”.

2 Press ▲ or ▼ to select “Input Block”, then press ▶ or ENTER.

Picture	Sound	Time	Setup	Lock	Channel
TV			UnBlock
AV			UnBlock
Component			UnBlock
HDMI1			UnBlock
HDMI2			UnBlock
HDMI3			UnBlock
PC			UnBlock
Media			UnBlock

3 Press ▲ or ▼ to select which device will be blocked, then press ◀ or ▶ to select “Block”.

NOTE:

• If you want to use such a device again, you should setting “UnBlock” in step 3.

21EN