Setting the picture size
You can change to a variety of picture sizes— Natural, Full, Zoom, Cinema, Native (For PC mode only).
Selecting the picture size
1 Select “Picture ⇒ Advanced Settings ⇒ Picture Size”.
2 Press ◀ or ▶ to select the desired picture size, as described below.
NOTE:
• Selectable picture sizes may vary depending on the input source or broadcast signal.
• You can be select desired size of picture by pressing PICTURE SIZE on the remote control.
Natural
In some cases, this image will display the size of standard 4:3 with a black side bar.
Full
Full will display the picture at the maximum size.
Zoom (for letter box programs with subtitles)
To fill the width of the screen, it is extended horizontally. However; it is only slightly extended at the top and the bottom.
The top and bottom edges of the picture may be hidden.
|
|
|
|
|
|
- - - - - - - - - - - - - - - |
| A B C D E F G - - - - - - - - - - - - - - - - |
|
Cinema (for letter box programs) The entire picture is uniformly
The top and bottom edges of the picture may be hidden.
A B C D E F G - - - - - - - - - - - - - - - -
Full
Native (for PC mode only)
Detects the resolution of the signal of the image and it will be shown on the screen with same amount of pixels.
EN 24