Insignia NS-DXA1-APT manual Setting the clock, Selecting the TV program aspect ratio

Converter Box with Analog Pass Through

Setting the clock	2 Press	or to select OPTION, then press
Normally, your converter box uses time signals	or	. The OPTION menu opens.
sent from DTV channels to automatically set the
clock. If the time is not set automatically, you can
set the clock by selecting the time zone.

To set the clock:

1Press MENU. The menu system opens.

3 Press or to select TV Aspect Ratio, then press or .

4 Press or to select channel 4:3 (standard TV screen) or 16:9 (wide-screen TV screen), then press .

2 Press or to select Option, then press	Selecting the TV program aspect ratio
or . The Option menu opens.	You can select the aspect ratio for the current TV
	program.

3Press or to select Clock, then press or .

4Press or to select the time zone, then press to select Day Light Saving.

5Press or to select On, Off, or Auto. If you select Auto, your converter box uses time signals from DTV channels to determine the correct setting.

Selecting the TV type

You set the TV type (aspect ratio) the first time your turned on your converter box. You can change the TV type, if necessary.

To select the TV type:

1Press MENU. The SETUP menu opens.

Note

If the aspect ratio is set by the program and cannot be changed, this option will be grayed and display the message “Set by Program.”

To select the TV program aspect ratio:

1Press MENU. The SETUP menu opens.

2Press or to select OPTION, then press or . The OPTION menu opens.

3Press or to select Aspect Ratio, then press or .

4Press or to select an aspect ratio, then press . The options you can choose vary, depending on the TV type you selected.

www.insignia-products.com 9