Insignia NS-DXA1-APT manual Adjusting the volume, Changing channels, Searching for channels

Converter Box with Analog Pass Through

To set the output channel:	Adjusting the volume
1 Press MENU. The SETUP menu opens.	To adjust the volume:
	• Press VOL + or VOL – to increase or
	decrease the volume.
	• Press MUTE to turn off the sound. Press
	MUTE again to restore the sound.

2Press or to select Output Channel, then press or .

3Press or to select channel 3 or 4, then press .

Changing channels

Note

You must use the remote control that came with your converter box or program your existing universal remote control to work with your converter box. For instructions, see “Programming the converter box remote control” on page 16.

To change channels:

•Press CH or CH to select a channel in the memorized channel list.

•Press the number buttons for the channel you want. If you want a digital sub channel, press the number buttons for the main channel, press –, then press the number for the sub channel. For more information about sub channels, see “Digital sub channels” on page 3.

When you use the number buttons to select a channel, the Channel List appears. Press or to select the channel, then press .

•Press RECALL to return to the last channel you were watching.

•Press FAV to select a channel from the Favorites list.

Warning

If the volume is set too high when you press MUTE to restore the sound, you may damage your hearing or the TV speakers.

Note

For best performance, set the volume control on the TV to mid-range, then use the converter box remote control to adjust the volume.

Searching for channels

Your converter box searched for available channels the first time you turned it on. If you move your converter box to a new TV viewing area, move your antenna, or if the available channels change, you can search for channels again.

To search for channels:

1Press MENU. The SETUP menu opens.

2Press , then press or to select Auto Tuning, then press to start the search. Your converter box searches for available channels and stores the channel information in the memorized channel list.

Adding new channels to the channel list

If new channels become available after the initial search for channels or if you move your antenna to tune additional channels, your converter box can search for the added channels and add the channel information to the memorized channel list.

To add channels to the memorized channel list:

1Press MENU. The SETUP menu opens.

www.insignia-products.com 7