–
VCR DVD DTV SAT CBL HD
: Uses the default label name
: Video cassette recorder
: DVD video
: Digital TV set-top box
: Satellite box
: Cable box
: HDMI device (only for HDMI inputs)
: Select
: Adjust
HDMI
-
Component
-
Video
-
Video Label
Press ◀ or ▶ to select the desired label for that input source.
Press ▲ or ▼ to select an input which you want to label.
Select “Setup”, then press ▶ or ENTER.
Press ▲ or ▼ to select “Video Label”, then press ▶ or ENTER.
The Video Label feature allows you to label each input source for your TV.
1
2
3
4
Labeling video inputs
After step 3 above, press ▲ or ▼ to select “Label Clear”, then press ▶ or ENTER.
NOTE:
• The channel labels will be reset after “Automatic Search” on page 19.
To clear a Ch Label
When you finish inputting the label name, press EXIT to return to the normal screen.
Repeat steps 3-4 for other channel.You can assign a label to each channel.
5
6
SPACE
If the character which you desire appears, press
ENTER.
Repeat this step to enter the rest of the characters. If you would like a blank space in the label name, you must choose the empty space from the list of characters.
The characters rotation as follows:
4
Channel label appear with the channel number display each time you turn on the TV, select a channel, or press DISPLAY.
You can choose any four characters to identify a channel.
Labeling channels
050 100
Signal Level
NOTE:
• Signal meter feature is not available for analog channels.
• After 240 seconds, DTV Signal screen will return to normal TV-operation automatically.
DTV Signal
Press ENTER to check the Digital-signal strength. The Digital-signal strength screen will appear.
If necessary, adjust the direction of the antenna to obtain the maximum signal strength.
Press ▲ or ▼ to select “DTV Signal”.
Select “Channel”, then press ▶ or ENTER.
This TV will allow you to view the digital signal meter for digital channels.
1
2
3
Checking the digital- signal strength
ENTER:Set
Clear All
: Select
>>
Add/Delete
>>
Adding Channel
>>
Add/Delete
Press ▲ or ▼ to select “Clear All”, then press ▶ or
ENTER.
Press ▲ or ▼ to select “Add/Delete”, then press ▶ or ENTER.
All channels are deleted from the channel memory. 1 Select “Channel”, then press ▶ or ENTER.
2
3
Clear All
To create channel labels
1 Select “Channel”, then press ▶ or ENTER.
2 Press ▲ or ▼ to select “Ch Label”, then press ▶ or ENTER.
The “Ch Label” menu will appear.
3 Press ◀ or ▶ to select a channel you want to label, then press ▼.
20
Ch Label
| Channel Number |
| |
| Ch Label |
|
|
| Label Clear | >> |
|
|
|
|
|
: Select : Adjust
Press ◀ or ▶ repeatedly until the character you want appears in the first space.
Ch Label
| Channel Number |
| |||
| Ch Label |
| A |
|
|
| Label Clear | >> |
| ||
|
|
|
|
|
|
: Select : Adjust ENTER:Set