Sansui SLED1980 owner manual Remote control, Increase, or the button to decrease the sound level

10

11

1.POWER Button - Used to turn the power on/off to the LCD TV.

2.DISPLAY Button - When you press this button, the current information will be displayed on a screen. To remove the display from the screen, press this button again.

3.Direct Channel Selection Buttons (0-9) - Allows direct access to any channel of the LCD TV.

4.– Button -This button is the “–” button used when selecting digital channels. Also can display the current channel number when viewing the program.

Remote control

1

2

3

4

5

6

7

8

9

125.MENU Button - Use to display the On-Screen

13menu function.

6.CURSOR ▲/▼/◀/▶ Buttons - Used to operate the menu functions of the LCD TV.

7.ENTER Button - Use to enter or select information for On-Screen operations.

148.MUTE Button - To turn off the sound, press this button once. The LCD TV will be silenced and

15the symbol “Mute” will appear on the screen. The muting feature can be released by pressing the MUTE button again or one of the VOL (VOLUME) + or – buttons.

9.VOL (VOLUME) + / – - Press the + button to

16increase, or the – button to decrease the sound level.

1710.INPUT SELECT Button - Use to change the external input.

11.CCD Button - Used to display the Closed Caption menu screen.

12.SLEEP Button - To set the LCD TV to turn off after a preset amount of time, use the SLEEP button on the remote control.

13.PICTURE SIZE Button - Used to change the picture size.

14.RECALL Button - This button allows you to go back to the previous channel selected by just pressing the RECALL button. Press this button again to return to the channel you were watching.

15.EXIT Button - Press to remove setup menu.

16.AUDIO Button - Change sound track language.

17.CH (CHANNEL) / - To change the channels of the LCD TV.

Before using the remote control, batteries must first be installed.

HOW TO INSTALL BATTERIES

1.Open the battery compartment cover.

2.Install two “AA” batteries (supplied).

3.Replace the battery compartment cover.

Use two “AA” size batteries. The batteries may last approximately one year depending on how much the remote control is used. For best performance, it is recommended that batteries should be replaced on a yearly basis, or when the remote operation becomes erratic. Do not mix old and new batteries or different types.

BATTERY PRECAUTIONS

These precautions should be followed when using batteries in this device:

• Use only the size and type of batteries specified.

• Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.

• Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.

• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

• Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)

10