GETTING STARTED
TV/VCR CONNECTION
The basic connection (TV and VCR), right, is the most common connection and is therefore used to illustrate a single component connection with your TV.
Cables
You will use either of the following type of cable to make your connection:
Coaxial Cables: Carries the signal from the antenna or cable directly to the television or through a cable box, as needed by your cable system.
Audio/Video Cables: Carries audio and video from a component to the TV.
How to View the VCR
To watch the VCR with the connection using the CABLE/ANTENNA jack, tune the TV to Channel 3 or 4. To watch the VCR with the connection using the AUDIO/VIDEO in jacks, tune the TV to the Video Input (press 0, 0 on the remote).
CABLE, CABLE BOX, OR ANTENNA
VCR 1
IN FROM ANT CH3
OUT | CH4 |
OUT TO TV VIDEO AUDIO
TV
CABLE/
ANTENNA | VIDEO AUDIO |
OR
CABLE, CABLE BOX, OR ANTENNA
VCR 1
| IN FROM ANT CH3 |
OUT | CH4 |
| OUT TO TV |
VIDEO AUDIO |
|
TV
CABLE/
ANTENNA
VIDEO AUDIO
TIP
Your TV is equipped with an audio/ video input. To tune to the audio/ video input, press “0, then 0” (zero button twice) on the remote. The audio/video input can also be added to the channel scan list and accessed by the channel up and down buttons.
3