Using the TV’s Menu System
Tip
To enter a number greater than 99, press and hold “1” to enter the hundreds digit, then press the two remaining numbers.
TV MAIN MENU
1 Audio
2 Picture Quality
3Screen
4 Channel
5 Time
6 Parental Controls
TIME
7 GUIDE Plus+ Menu
8Setup1 Sleep Timer
0 Exit2 Schedule
3 Set Time
0 Exit
Channel # Use the up and down arrows to scroll up and down through the channels available via your antenna. You can enter the channel number directly using the number buttons.
Normal List Only the channels included in the Normal list are available when you scan up and down using channel up and down. Use the up and down arrow buttons to indicate whether the channel number indicated is included (Yes) or is not included (No) in the Normal channel list.
Channel Label Use the up and down arrow buttons to enter a six- character label for each channel. Hold the button down to scroll quickly through the characters. The TV can store up to 27 labels in memory.
Auto Tuning Displays a choice list that lets you set up the TV to automatically tune to the correct input channel when you press a component button (VCR1, DVD, VCR2, or SAT•CABLE) on the remote. Go to Chapter 3 for details about the Auto Tuning feature.
Video Input Source Lets you select whether or not you have used the
Time Menu
Sleep Timer Displays a control panel that lets you select the amount of time you want to give the TV before it shuts itself off.
Schedule Displays a control panel that lets you set up a schedule for turning the TV on and off automatically. Reminder: you must turn the schedule On. The
Set Time Displays a control panel that lets you enter the current time. The on- screen directions guide you through the steps needed to set the time. If your GUIDE Plus+ system is set up, it will automatically update your time and this option will not appear.
52 | Chapter 4 |