Sony SLV-SF950N Canal Plus S22, Line selection S23, Remote Commander S24, S25, Cleaning S26, S29

Canal Plus

S22	PAY-TV/Canal Plus	t Make sure the Canal Plus Scart cable is plugged in securely.
	is always recorded	t Be sure that DECODER/LINE3 is set to DECODER in the OTHER
	scrambled.	OPTIONS menu (see page 70).
		t Be sure that this channel is set as PAY-TV/CANAL+ in the TUNER
		menu (see page 36).
	Line selection
S23	You cannot select	t Be sure that DECODER/LINE3 is set to LINE3 in the OTHER
	LINE3.	OPTIONS menu (see page 70).
	Remote
	commander
S24	The remote	t Make sure you are pointing the remote commander at the remote
	commander does not	sensor on the VCR.
	operate.	t Replace all of the batteries in the remote commander with new ones
		if they are weak.
		t Make sure the TV/VIDEO remote control switch is set correctly.
S25	You cannot control	t Set your TV’s code number. The code number may change when
	your TV.	you replace the batteries for the remote commander (see page 8).
	Cleaning
S26	The VCR needs to be	t Clean the cabinet, panel and controls with a dry, soft cloth, or a soft
	cleaned.	cloth slightly moistened with a mild detergent solution. Do not use
		any type of solvent, such as alcohol or benzene.
	Clock
S27	The clock has	t The clock stops if the VCR is disconnected from the mains for
	stopped and “–:– –”	more than one hour. Reset the clock and timer if needed (see page
	lights up in the	21).
	display window.
	Power
S28	The ?/1 ON/	t Connect the mains lead to the mains securely.
	STANDBY switch
	does not function.
S29	The power is turned	t Moisture condensation has occurred. Turn the power off, unplug
	on but the VCR does	the mains lead and leave the VCR to dry for over three hours.
	not operate.
S30	The tape is ejected	t You have set a timer recording, but the tape on which you want to
	when you press ?/1	record is protected (or contains protected recordings). Unlock the
	ON/STANDBY.	protection or use another tape or replace the safety tab (see page
		95).
S31	The display does not	t The VCR is in power save mode. Set the POWER SAVE option to
	lit when the VCR is	OFF in the OTHER OPTIONS menu (see page 70).
	in standby mode.
S32	POWER SAVE is set	t The display is always lit if the VCR is in timer standby mode. For
	to ON but the display	more details regarding the energy saving function, see page 70.
	remains lit in standby
	mode.

102