Step 4 : Tuning your TV to the VCR (continued)
5 – PROGRAM + Press PROGRAM +/– (repeatedly) to select the correct TV system. If you watch the system B/G, select “G.” If you watch the system D/K, select “K.”
6 | Tune the TV to the same channel as that |
| shown in the display window so that |
| the picture on the right appears on the |
| TV screen. |
Refer to your TV manual for tuning instructions.
If the picture does not appear clearly, see “To obtain a clear picture from the VCR” below.
SONY VIDEO CASSETTE RECORDER
7 |
| Press RF CHANNEL. |
|
RF CHANNEL | You have now tuned your TV to the VCR. Whenever you want to |
| |
| play a tape, set the TV to the video channel. |
|
|
To check to see if the TV tuning is correct
Set the TV to the video channel and press PROGRAM +/– on the VCR. If the TV screen changes to a different programme each time you press PROGRAM
To obtain a clear picture from the VCR
If the picture does not appear clearly in step 6 above, go to step 7 to finish this procedure once. Then start again from step 2. After pressing RF CHANNEL in step 2, press PROGRAM +/– while the RF channel is displayed, so that another RF channel appears. Then tune the TV to the new RF channel until a clear picture appears.
Note
• If you set the wrong TV system, you may have no sound or sound may be distorted.
12
Getting Started