Sony SLV-E580EE manual Specifications, System, Inputs and outputs, General, Supplied accessories

Page 50

Specifications

System

Channel coverage VHS E2-E12, R1-R12 UHF E21-E69, R21-R69 CATV S1-S41, S01-S05

RF output signal

UHF channels 21 to 69 Aerial out

75-ohm asymmetrical aerial socket

Inputs and outputs

:LINE-1 (TV) 21-pin

Video input: pin 20

Audio input: pins 2 and 6

Video output: pin 19

Audio output: pins 1 and 3 LINE-2 IN

VIDEO IN, phono jack (1) Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO IN, phone jack (1) Input level: 327 mVrms

Input impedance: more than 47 kilohms LINE-2 OUT

AUDIO OUT, phono jack (2) Rated output level: 327 mVrms Load impedance: 47 kilohms

Output impedance: less than 10 kilohms VIDEO OUT, phono jack (1)

Rated output: 327 mVrms

Load impedance: 47 kilohms

Output impedance: less than 10 kilohms

General

Power requirements

220 – 240 V AC, 50 Hz Power consumption

23 W Operating temperature

5°C to 40°C Storage temperature

–20°C to 60°C Dimensions

Approx. 430 × 100 × 314 mm (w/h/d) including projecting parts and controls

Mass

Approx. 4.6 kg

Supplied accessories

Remote commander (1)

R6 (size AA) batteries (2)

Aerial cable (1)

Design and specifications are subject to change without notice.

50

Additional Information

Image 50
Contents Video Cassette Recorder Installing PrecautionsSafety Compatible colour systemsTable of contents Unpacking Getting StartedInserting the batteries Setting up the remote commanderUsing the remote commander To operate SetCursor /./? Setting up the remote commanderTV control buttons PROG+ VOL+Menu Controlling other TVs with the remote commanderDisplay WideCode numbers of controllable TVs Manufacturer Code numberMains lead Connecting the VCRTo mains Aerial cable supplied Signal flow To a TV that has Line in connector Connecting the VCRTo a TV that has a EURO-AV Scart connector Additional connectionsTuning your TV to the VCR To obtain a clear picture from the VCR Tuning your TV to the VCRTo check to see if the TV tuning is correct Setting up the VCR with the Auto Set Up function To cancel the Auto Set Up functionSetting the clock Before you start…Press Cursor /to start the clock Manual setup Selecting a language Manual setup Presetting channels Prog +Manual setup -- Presetting channels TV system Channel number SET fieldDisabling unwanted programme positions If the picture is not clear Press Cursor ?//to get a clearer picture, then press OKBasic Operations Playing a tapeBasic Operations FF P Pause 0 REW á Play StopTo replay a recently watched scene Playing a tapeAdditional tasks To set the colour systemTo use the time counter Enjoying the simulated stereo sound Virtual StereoRecording TV programmes REC StopRecording indicator To stop recordingTo watch another TV programme while recording Recording TV programmesTo check the remaining time To save a recordingDisplayed. BasicOperations TipsRecording TV programmes using the timer Press ON/STANDBY to turn off the VCR Daily/weekly recording Recording TV programmes using the timerTo use the VCR after setting the timer To record satellite broadcastsTips REW Playing/searching at various speedsAdditional Operations REW á Play Playback options OperationTo use the shuttle ring in jog mode Using the shuttle ringTo use the shuttle ring in normal mode Reverse High speedPlaying/searching at various speeds To resume normal playbackTo extend the duration Recording TV programmes using the quick timerUsing the quick timer during stop mode Checking Changing/ cancelling timer settings Programme Will be cut off About 20 seconds will be cut off When the timer settings overlapProgramme Searching using the index function To stop searchingAbout Optimum Picture Control OPC Adjusting the pictureAdjusting the tracking Adjusting the picture Tape Options menu choices Menu option Set this option to Changing menu optionsMenu choices Auto Tape SpeedOptions menu choices Changing menu optionsVideo Options menu choices Menu option Set this option to Menu option Set this option toConnecting to a VCR or stereo system How to connect to record on this VCRVMC-810 audio/video cable not supplied Signal flow How to connect to a stereo systemConnecting to a VCR or stereo system This VCR PlayerBefore you start editing When recording on this VCRBasic editing To stop editingTo stop while editing Audio dubbingBefore you start editing… Clock Power Playback Symptom Remedy TroubleshootingSymptoms caused by contaminated video heads Additional InformationTroubleshooting Recording Timer recording Symptom RemedyOthers Symptom Remedy VideoSystem SpecificationsSupplied accessories Inputs and outputsIndex to parts and controls Front panelDisplay window Index to parts and controlsRear panel Remote commander Additional Information Index G, H