Sony SLV-ED616SG manual Presetting channels, To check if the channels are preset correctly, Tip

Page 4

Presetting channels

First, we recommend that you preset the receivable channels in your area using the One Touch Tuning function or AUTO PRESET in the TUNER PRESET menu. Then, if some channels cannot be preset automatically, set them manually. If there are any unwanted channels among the preset ones, you can disable the channels.

Presetting all receivable channels using the One Touch Tuning function

PROGRAM +/–

ONE TOUCH

TUNING

ONE TOUCH

TUNING

Press and hold ONE TOUCH TUNING on the VCR for more than three seconds.

The VCR starts presetting the channels.

SP

APC

The WAIT indicator goes off when all receivable channels are preset.

To check if the channels are preset correctly

Set the TV to the video channel and press PROGRAM +/– on the VCR. If the TV screen changes to a different programme each time you press PROGRAM +/–, the channels are preset correctly.

If the sound is distorted or noisy, the VCR is set to a TV system different from your area’s system. Select the correct TV system and preset channels using the TUNER PRESET menu as shown on the next page.

Tip

•To stop the One Touch Tuning function, press ONE TOUCH TUNING or p STOP on the VCR during the setting.

4

01GB02CNT-ED818.p65

4

12/3/01, 11:09 AM

SLV-ED818 GB 3-065-581-E1 (1)

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Video Cassette Recorder SLV-ED818GB 3-065-581-E1Connecting the VCR Additional connectionsSetting the clock Before you start…To check if the channels are preset correctly Presetting channelsTip Presetting all receivable channels automatically Presetting channels Manually Channel SETDisabling unwanted programme positions Channel coverage System B/G System D/KRecording TV programmes To stop recordingTo check the remaining tape length To watch another TV programme while recordingRecording TV programmes using the Easy Timer function Setting the Easy TimerREC Speed Easy Timer knob Programme Number Buttons Setting or changing the Easy ClockProg + Commander Do this on the VCRTo cancel the timer setting To check or change the timer settingTo use the VCR after setting the timer Tips Setting the timer manually Setting the timer manually Daily/weekly recordingPlaying/searching at various speeds To resume normal playbackREW Pause x Stop Slow Stop REW Playback options OperationSetting the recording duration time To cancel the durationTo extend the duration RECHow to connect to record on this VCR e.g. SLV-ED818SG How to connect to a stereo system SLV-ED818SG onlyEditing with another VCR Before you start editing Operation When recording on this VCRTo stop editing
Top Page Image Contents