Recording TV programmes
PROGRAM +/– z REC
1
2
Turn on your TV and set it to the video channel.
Insert a tape with its safety tab in place.
3 PROGRAM | Press PROGRAM +/– to select the programme position you want to |
| |||
|
|
| record. |
| |
|
|
|
|
|
|
|
|
|
| SP |
|
|
|
|
| APC |
|
|
|
|
|
|
|
|
|
|
|
|
|
4 REC
Press z REC to start recording.
The recording indicator lights up red in the display window.
Recording indicator | LP | APC |
|
To stop recording
Press x STOP.
To check the remaining tape length
Press DISPLAY on the remote commander. The white bar indicates the approximate length of tape remaining.
To watch another TV programme while recording
1 If the TV is connected to the VCR using an audio/video cable, set the TV to TV input. If the TV is connected to the VCR using only the aerial cable, skip this step.
2 Select another programme position on the TV.
To save a recording
To prevent accidental erasure, break off the safety tab as illustrated. To record on the tape again, cover the tab hole with adhesive tape.
Safety tab
8
8 | 12/3/01, 11:10 AM |