Firmware Upgrade Instructions
(1) Unpacking the box
When unpacking the recorder ensure the following items present.
•one recorder
•one remote controller
•one power adapter
•two AV cables
(2) Connecting the recorder to TV
•Connect the power adapter to the recorder and plug the adapter to an outlet.
•Connect the AV cable to the AV OUT socket on the recorder.
•Connect the corresponding video and audio connector of the AV cable to the video and audio input on the TV.
•Turn on the TV and switch to AV mode.
(3) Turning on the recorder
•Unpacking the remote controller and remove the slip inserted inside the controller.
•Press “Power” on the remote controller.
•The main page presents as the figure 1.
47