Figure 1 Main Page
Note: Depending on your region, you may need to change TV out- put from NTSC to PAL at this point. This is done by accessing the settings menu (figure 2 below) and changing the TV Output mode.
(4) Upgrade the firmware
•Unzip and Save new firmware file to CF/Memory stick card via a CF/Memory stick card reader. The vcr4800.bin file should be saved directly to directory and not in any folder.
•Insert CF/Memory Stick card into the
•Scroll to the Setup mode by pressing right arrows on the remote controller. Setup mode shows as the figure 2.
Figure 2 Setup Menu
•Press “Enter” on the remote controller entering the Setup menu.
•Scroll through the Setup menu to the second page. The current firmware version like v.1.03.44 will show underneath the Factory Reset.
•Use the up arrow to scroll to the Firmware Upgrade.
•When the Firmware Upgrade is highlighted, press “Enter” on the remote controller to start the firmware upgrade.
•A “Clock” icon will pop up and remains for seconds.
48