Recording | DVD VHS |
AV3 
S VIDEO IN VIDEO IN L/MONO AUDIO IN R
S
Audio cable
L- White R - Red
AV3 
S VIDEO IN VIDEO IN L/MONO AUDIO IN R
Audio/Video cable
Video - Yellow
L - White
R - Red
Recording in dual-channel audio
On
Use AUDIO to switch between the two recorded sound tracks.
Specifying a time as the recording duration
This function is not available for Timer Recordings.
Press 
REC on the unit during recording.
The recording time changes each time the button is pressed on the unit display:
OFF | 0:30 | 1:00 | 1:30 | 2:00 | 3:00 | 4:00 | OFF |
Press STOP 
. The recording is paused and the time setting is deleted.
The unit switches itself off at the end of the recording if no functions are being executed on another drive. This function is not possible during a Timer- or Ext Link recording.
DVD: This function is not possible with Flexible Rec. If the channel or recording mode (XP, SP, LP, EP) is changed while recording is paused, the time is deleted.
VHS: If the tape speed is changed during the recording, a slight picture distortion will occur at that point.
DVD playback during recording | RAM |
During the recording, you can the playback from the beginning of the programme.
Press PLAY 
during recording or Timer Recording
At least 2 second must have elapsed since the beginning of the recording.
DIRECT TV REC
Direct TV recording
If your TV is equipped with Q Link, you can record a TV programme that you are currently watching. Other settings are not necessary. The recorder automatically switches to the appropriate station.
It works to the selected drive when the button is pressed.
Press DIRECT TV REC for 3 seconds. Recording begins.
Press STOP 
to stop the recording.
Recording from an external unit, e.g. a camera
Connect the external unit to the AV3 input sockets on the front side of the unit.
Select one of the two connection options.
The S
You cannot receive signals from PCs with this unit.
Recording to VHS: Insert a video cassette with an intact
Select the VHS drive with DRIVE SELECT.
Select the recording mode with REC MODE.
In STOP mode, use INPUT SELECT to select input channel AV3.
Press PLAY 
.
At the point where you wish to start recording press PAUSE 
.
Press 
REC.
Start playback on the external unit.
Then press PAUSE 
to start the recording.
Use STOP 
to stop the recording.
Recording to DVD: Insert a recordable disc.
If you activated the write protection, cancel it. | RAM |
Select the DVD drive with DRIVE SELECT.
Select recording mode with REC MODE.
In
Start playback on the external unit.
Press 
REC at the point where you want to start the recording.
Use STOP 
to stop the recording.
Selecting the sound track to record for programmes with
Before recording, select Sound setting Bilingual Audio Selection [M1] or [M2]
in the Setup menu. | 49 |
Select [M1] or [M2] on an external unit before recording. |
|
If the output signal of the external unit is an NTSC signal, set the TV System
to [NTSC] in the Setup menu. | 50 |
25