Troubleshooting guide
TV screen and video (continued) |
| Page | |
|
|
| |
The recorded title is stretched | ≥16:9 aspect programmes are recorded in 4:3 aspect in the following cases. | — | |
vertically. | – | ||
| recording mode. | — | |
| – If you recorded or copied to a +R, +R DL or +RW. | ||
| – If you recorded with the “Aspect for Recording” set to “4:3” in the Setup menu. | 58 | |
| When you want to record 16:9 programme in the same aspect, set “Rec for High Speed |
| |
| Copy” to “On”, and set the “Aspect for Recording” to “16:9”. | 58 | |
| – By setting “Aspect for Recording” to “Automatic”, there is a chance that the recording will be | ||
| made using the wrong aspect. Match the aspect settings to the broadcast when recording. |
| |
| It may be possible to adjust the display mode on the TV. Refer to your television’s operating |
| |
| instructions. |
| |
There is a lot of | ≥Set “Playback NR” in the Picture menu to “Off”. | 53 | |
playing video. |
|
| |
|
|
| |
When playing | ≥Set “Progressive” in the Picture menu to “Off”. This problem is caused by the editing method or | 53 | |
progressive output, one part of | material used on |
| |
the picture momentarily appears |
|
| |
to be doubled up. |
|
| |
There is no apparent change in | ≥The effect is less perceivable with some types of video. | — | |
picture quality when adjusted |
|
| |
with the Picture menu in the on- |
|
| |
screen menus. |
|
| |
|
|
| |
The images from this unit do not | ≥Make sure that the television is connected to the VIDEO OUT terminal, | 8, 9, 63, | |
appear on the television. | S VIDEO OUT terminal, COMPONENT VIDEO OUT terminals or HDMI AV OUT terminal on | 64, 65 | |
| this unit. | — | |
Picture is distorted. | ≥Make sure that the television’s input setting (e.g., AV 1) is correct. | ||
≥Progressive output is set to on but the connected television is not progressive compatible. | — | ||
| |||
| Press and hold [∫] and [1] (PLAY) on the main unit at the same time for more than 5 seconds |
| |
| to cancel this setting. The setting will change to interlace. | 60 | |
| ≥The unit’s “TV System” setting differs from the TV system used by the disc now playing. While | ||
| stopped, keep pressing [∫] and [< OPEN/CLOSE] on the main unit for 5 or more seconds. |
| |
| The system switches from PAL to NTSC or vice versa. | — | |
| ≥When this unit is connected with an HDMI cable, use a disc that matches with this unit’s TV | ||
| system. | — | |
| ≥Picture may not be seen when more than 4 devices are connected with HDMI cables. | ||
| Reduce the number of connected devices. |
| |
The picture is distorted during | ≥You may be playing a TV programme recorded with poor reception or unfavorable weather | — | |
play, or video will not play | conditions. |
| |
correctly. | ≥The picture may be distorted or a black screen may appear briefly between recorded titles in | — | |
| the following situations: |
| |
| – between titles recorded with different recording modes. |
| |
| – between scenes recorded with different aspect ratios. |
| |
| – between scenes recorded with different resolutions. |
| |
| – between playlist chapters. |
| |
|
|
| |
Sound |
|
| |
|
|
| |
No sound. | ≥Check the connections and the “Digital Audio Output” settings. Check the input mode on the | 8, 9, 59, | |
Low volume. | amplifier if you have connected one. | 63, 64, 65 | |
Distorted sound. | ≥Press [AUDIO] to select the audio. | 26 | |
Cannot hear the desired audio | ≥Turn off V.S.S. in the following cases. | 53 | |
type. | – When using discs that do not have surround sound effects such as Karaoke discs. |
| |
| – When playing bilingual broadcast programmes. | — | |
| ≥Audio may not be output due to how files were created. (DivX) | ||
| ≥Audio may not be heard when more than 4 devices are connected with HDMI cables. | — | |
| Reduce the number of connected devices. | — | |
| ≥The sound effects will not work when the bitstream signal is output from the HDMI AV OUT | ||
| terminal or the OPTICAL DIGITAL AUDIO OUT terminal. | 60 | |
| ≥To output audio from a device connected with an HDMI cable, set “Digital Audio Output” to | ||
| “HDMI and Optical” in the Setup menu. | — | |
| ≥Depending on the connected equipment, the sound may be distorted if this unit is connected | ||
| with an HDMI cable. | 58 | |
| ≥If recording to the HDD or a | ||
| can only record either the main or secondary audio of a bilingual broadcast. |
| |
| If you do not intend to copy the title to a |
| |
| +R, +R DL or +RW set “Rec for High Speed Copy” in the Setup menu to “Off”. |
| |
Cannot switch audio. | ≥You cannot switch the audio in the following cases. | — | |
| – When a | ||
| disc tray while DVD drive is selected. | 59 | |
| – When the recording mode is XP and “Audio Mode for XP Recording” is set to “LPCM”. | ||
| – When “Rec for High Speed Copy” is set to “On”. (The default setting is “On”). | 58 | |
| ≥The amplifier is connected using an optical digital cable or an HDMI cable. You cannot switch | 59, 64 | |
| the audio if “Dolby Digital” is set to “Bitstream”. Set “Dolby Digital” to “PCM” or connect using |
| |
| audio cables. | — | |
| ≥There are discs for which audio cannot be changed because of how the disc was created. | ||
|
|
|
RQT9075
70