Messages
On the unit’s display
The following messages or service numbers appear on the unit’s display when something unusual is detected during startup and use.
|
|
|
| Page |
|
|
|
|
|
DVD | ≥The remote control and main unit are using different codes. Change the code on the remote control. | 61 | ||
(“∑” stands for a number.) |
|
| Press and hold [OK] and the indicated number button at the same time for more |
|
|
|
|
| |
|
|
| than 5 seconds. |
|
|
|
|
|
|
|
|
|
|
|
HARD ERR§ | ≥If there is no change after turning the unit on and off, consult the dealer where the unit was purchased. | — | ||
NoERAS | ≥You cannot delete items on this disc. | — | ||
|
| The disc may be damaged. Use a new disc. |
| |
|
|
|
|
|
NoREAD | ≥The disc is dirty or badly scratched. The unit cannot record, play, or edit. | 15 | ||
| ≥This message may appear when the DVD lens cleaner has finished cleaning. | 5 | ||
|
| Press [< OPEN/CLOSE] on the main unit to eject the disc. |
| |
|
|
|
|
|
NoWRIT | ≥You cannot write to this disc. | — | ||
|
| The disc may be damaged. Use a new disc. |
| |
|
|
|
|
|
PLEASE WAIT§ | ≥There was a power failure or the AC plug was disconnected while the unit was on. The unit is carrying | — | ||
|
| out its recovery process. This process restores the unit to normal operation. The unit is not broken. Wait |
| |
|
| until the message disappears. |
| |
|
|
|
|
|
PROG FULL§ | ≥There are already 32 timer programmes. Delete unnecessary timer programmes. | 25 | ||
REMOVE | ≥The USB device is drawing too much power. Remove the USB device and turn the unit off. | — | ||
|
|
|
|
|
SP 35:50 | ≥Available space on the HDD or disc. | — | ||
LP 151h |
| The example “SP 35:50” is displayed when less than 100 hours are available and the example |
| |
“SP”,”LP” and the numbers |
| “LP 151h” is displayed when over 100 hours are available. |
| |
are examples. |
| “SP” and “LP” are recording modes, “35:50” means “35 hours 50 minutes” and “151h” means |
| |
|
| “151 hours”. |
| |
|
|
|
|
|
UNFORMAT§ | ≥You inserted an unformatted | 55 | ||
|
| Video format) that has been recorded on other equipment. |
| |
|
| Format the disc to use it. |
| |
|
| However all the recorded contents on the disc are deleted. |
| |
|
|
|
|
|
UNSUPPORT§ | ≥You have inserted a disc the unit cannot play or record on. | |||
| ≥You tried to operate with a | 13 | ||
|
|
|
|
|
F74 | ≥The HDMI connection could not be authenticated due to a transfer malfunction. | — | ||
|
| Consult the dealer where the unit was purchased. |
| |
|
|
|
|
|
F75 | ≥The HDMI connection could not be authenticated due to an internal data malfunction. | — | ||
|
| Consult the dealer where the unit was purchased. |
| |
|
|
|
|
|
U59 | ≥The unit is hot. | — | ||
|
| The unit switches to standby for safety reasons. Wait for about 30 minutes until the message |
| |
|
| disappears. |
| |
|
| Select a position with good ventilation when installing the unit. Do not block the cooling fan on the rear |
| |
|
| of the unit. |
| |
|
|
|
|
|
U61 | ≥(When a disc is not inserted) Displays when a malfunction has occurred during recording, playback or | — | ||
|
| copy. This is displayed when the unit is in the recovery process to return to normal operation; it is not |
| |
|
| broken. Once the display clears you can use the unit again. |
| |
|
|
|
|
|
U76 | ≥HDMI cannot be output because you are connected to a model that does not support copyright | — | ||
|
| protection. |
| |
|
|
|
|
|
U80 | ≥The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit to standby mode. Now | — | ||
U81 |
| press [Í/I] on the main unit again to turn the unit on. |
| |
U99 |
|
|
|
|
|
|
|
|
|
U88 | ≥(When a disc is inserted) Displays when there was something unusual detected with the disc while | 69 | ||
|
| recording, playback or copy. This is displayed when the unit is in the recovery process to return to |
| |
|
| normal operation; it is not broken. Once the display clears you can use the unit again. |
| |
|
|
|
|
|
Hor F | ≥There is something unusual. (The service number displayed after H and F depends on the unit’s | — | ||
|
| condition.) | ||
| ≥Check the unit using the troubleshooting guide. If the service number does not disappear, do the | |||
|
| following. |
| |
|
| 1. Disconnect the plug from the household mains socket, wait a few seconds, then reconnect it. |
| |
|
| 2. Press [Í/I] to turn the power on. (The unit may be fixed.) |
| |
|
| If the service number does not disappear despite after doing the above, request service from the |
| |
|
| dealer. Inform the dealer of the service number when requesting service. |
| |
|
|
|
|
|
X HOLD | ≥The Child Lock function is activated. | 62 | ||
|
| Press and hold [OK] and [RETURN] at the same time until “X HOLD” disappears. |
| |
|
|
|
|
|
§The message are alternately displayed.
RQT9075
68