ID3 Operation, USB/SD Card Operation

F7		F8

Note: If the main unit is not working properly, disconnect the power source and then reconnect it again.

ID3 OPERATION

During in the MP3/WMA mode

1.Press the ID3/MONO/STEREO button on the unit (or remote control) once to open the ID3 function.

2.If the MP3/WMA file is written in “ID3”, it will automatically search the information of “TITLE NAME”, “ARTIST NAME” and “ALBUM NAME” indicated on the display.

3.Press the ID3/MONO/STEREO button on the unit (or remote control) again. Then the unit will resume to play normally.

USB/SD CARD OPERATION

During in the STANDBY mode

1.Insert the USB DEVICE or SD/MMC CARD, and then press the STANDBY/ON button on the main unit (or remote control) to turn on the unit.

2.Touch FUNC on the main unit to select the USB or CARD mode. The main unit will automatically read the total number of the folders and tracks at the same time. (F9)

3.If the USB memory device or SD/MMC CARD has more than one folder.

a.Press the PRESET/FOLDER ▲ or ▼ button to select each folder.

b.Touch or to select a track in the desired folder.

4.Touch /ENTER on the unit or press the /ENTER button on the remote control, will start playback from the selected track. The display shows the current track number and its elapsed time.(F10)

5.To pause playback, touch /ENTER on the unit or press the /ENTER button on the remote control. The time elapsed indicator will flash.(F11)

6.To resume playback, touch /ENTER on the unit or press the /ENTER button on the remote control again.

7.To stop playback, touch /MENU.

F9	F10			F11

Note: 1. In any time, the USB DEVICE or SD CARD must be fixed well under in the STANDBY mode to avoid the main unit and USB DEVICE or SD CARD were damaged.

2.This unit can support most of USB devices and SD/MMC cards. The memory capacity up-to 2GB. It can not access (or access a longer time) the memory capacity over 2GB. Otherwise, make an others to access it.

3.It can support USB version 1.1 and 2.0.

4.If the WMA file is a protected "DRM FILE" the display will show "PROTECT".

IMPORTANT INFORMATIONS

-Copyright protection files cannot be played back.

-Copyright protection files on the USB memory and SD/MMC card device are skipped automatically when played back.

-Recommended use:

Flash memory type USB memory player

-Not recommended:

Hard disc memory type USB player

-Some Flash memory player will not play successfully with this unit.