Sanyo DC-MX41i Assembly Drawing of Unit and Speaker, Fixing the whole set of the unit on the wall

ASSEMBLY DRAWING OF UNIT AND SPEAKER

1 Fixing the whole set of the unit on the wall

Parallel the two nails that fix into the wall, the distance of them should keep in 84mm.

Note : The size of the nail : 3.5*25BA.

84 mm

Press down and push the stand panel of the buckle A and B on the rear of the each speaker, and then each stand of the speaker will remove from them.

300 mm

Parallel the two nails that fix into the wall, the distance of them should keep in 300mm.

Note : The size of the nail : 3.5*25BA.

Press down and push the stand panel of the buckle C and D on the rear of the main unit, and then the stand of the main unit will remove from it.

50 mm 50 mm

Note: When wall-mounting the set of product in line, suggest keeping at least 50mm distance from the main unit to the speakers to achieve better stereo effect and to ensure the slide CD door with prefect movement.

3