Sony EBS-SP35 manual Sony Displays with DVI-HDCP Digital Connections, Initial Power On

Page 4

Sony Displays with DVI-HDCP Digital Connections

PPV Provider

Control Box

Power Supply

1.Connect HDMI cable to EBS-SP35

2.Connect HDMI to DVI adapter to Display Input 1

3.Connect HDMI cable to HDMI to DVI adapter

4.Connect L/R audio to SP35

5.Connect mini-jack audio to the Input 1 audio

6.Connect the Communication cable to the input marked Display on the SP35

7.Connect the 9-pin serial connector on the Communication cable to the input labeled Remote on display.

8.Plug mini-jack cable to Control-S Out

9, Connect Coax cable to RF IN on SP35

10.Connect PPV provider RJ12 to PPV input on SP35

11.Plug in 12V DC power adapter

Note: Sony FWD-42PX2 and FWD-42PV1 have connections located on the bottom of the display and in different configuration than shown above.

Initial Power On

When the power is applied to the EBS-SP35 with the external AC adapter, the device will power on. The power status of the EBS-SP35 can be confirmed by viewing a lighted Green LED through the top cover of the set-top-box.. If this light is not seen, check the connections of the power supply.

Menus / Configuration

Stand Alone vs. Lodging Mode

The EBS-SP35 is designed to operate in a Pay-Per-View environment, connected to a lodging system that uses protocols and commands to control the display and tuner. The EBS-SP35 may also be able to operate in a Stand Alone mode to provide basic TV tuning for the Sony Display.

When the EBS-SP35 is connected to a compatible lodging system, the SP35 will automatically recognize the lodging system and respond to the PPV commander. In Lodging Mode, the control buttons and IR commands from the Sony remote will not control the

Supported Remote Controls

The EBS-SP35 is designed to function with the remote control that shipped with the Sony display. Because of differences in the display remotes, in which not all remotes have the same available buttons, some remotes may have limited functionality with the display remote. In such case, as standard Sony TV remote or universal remote using Sony IR commands can control the EBS- SP35 in Stand-Alone Mode.

21

Copyright 2006 – Enseo, Inc.

4

Image 4
Contents Sony EBS-SP35 S e o , I n cHardware / Setup Menus / Configuration General OperationsSet Up Menu User MenuSetting Up the EBS-SP35 / Making Connections Hardware SetupFWD-32LX2 / FWD-40LX2 Connections Hdmi Models Initial Power On Menus / ConfigurationStand Alone vs. Lodging Mode Supported Remote ControlsSet Up Menu Tuning Mode Auto Channel InstallEdit Channel List Clear Channel ListChannel Include in ListType Analog Type SelectionDigital Type Selection Browse Digital ChannelsDigital Channel LabelSwitch-On Options VolumePower Picture FormatShow Volume Indicator Channel Banner ContentsUse 3-Digit Entry Show Channel GuideMinimum Volume Maximum VolumeESP Energy Savings Protection Source Menu ItemRestore User Setting Digital Captioning ModeAnalog Captioning Mode Captioning OptionsReset Access Code Default LimitsEnable V-Chip Chip OptionsSelect TV Ratings Change Access CodeSelect Movie Ratings Update Channel Allow Update SearchingStart Firmware Update Restore Factory SettingsSleep Timer User MenuSource Secondary Audio Programming SAPChip Options Lodging Mode General OperationStand Alone Controlling the Sony DisplayDisplay Show Blank Screen and No Input TroubleshootingDisplay and/or EBS-SP35 Do Not Respond to Remote What is the warranty on the EBS-SP35 Product SpecificationEBS-SP35 Specifications Which hospitality systems is the EBS-SP35 Compatible With?FCC Statement