Sony Cable Box To S Video YC-15V/30Vnot supplied, RK-74A notsupplied, To audio output

ConnectingOtherEquipment

Rear of ! V

VHF/UHF

to VHF/UHF in )ut ,,.,4._._,

to S VIDEO

E3::

YC-15V/30V(not supplied)

DEO AUDIO-L(white)

RK-74A (notsupplied)

to VIDEOAUDIO-R (red)

to audio output

_Signalflow

VHF/

UHF

output k\ \it n/l/

I

to S video output

Preparing for use

1 Turn on the TV.

2Press the TV/VIDEO button on the TV or on the Remote Commander so that "VIDEO" appears on the screen.

When you cannot obtain a clear picture and/or sound Make sure that the TV/VTR on the VCR is set to TV.

Reselect the channel you want to view with the controls on the TV or the Remote Commander.

To return to TV mode

Press the TV/VIDEO button on the TV or Remote Commander so

that a channel number appears on the screen.

1 VCRJ

About S video input

Video input and output signals can be separated into Y (luminance or brightness) and C (chroma or color) signals. Usually these two signals are combined in a VCR and sent as one signal to a TV. Separation of the Y and C signals prevents them from interfering with one another, thereby improving picture (especially color) quality.

This TV is equipped with an S video input jack through which these separated signals can be input directly. This way you can connect your S video-equipped VCR separately from a non-S video VCR.

•For operating instructions, refer to the instruction manual furnished with the VCR.

•If the picture or sound is affected, move the VCR away from the TV.

•If S VIDEO is set to OFF, you cannot watch VCR playback pictures from the S VIDEO input.

To set S VIDEO to ON, see "Watching a Video with Your S Video-Equipped VCR," p. 27.

4 Chapter 1: Setting Up