Sony Cable Box specifications Troubleshooting, Causes and .....remedies

Page 48

Troubleshooting

_ ' _i_;_::_ Sym_om

Poor or no picture (screen not lit), good sound

Good picture, no sound

Good picture, no sound from the cordless headphones

Good picture, noisy sound from the cordless headphones

No picture (screen not lit), no sound

No color

Snow and noise only

Dotted lines or stripes

Double images or ghosts

Try another

If the problem persists, contact your nearest service

_ _

_,_,_:.PoSsible,,

causes and .....remedies

_

Adjust PICTURE.

Adjust BRIGHTNESS.

Check antenna/cable connections.

Press VOLUME + on the TV or VOL + on the Remote Commander.

Press MUTING on the Remote Commander.

Check that the MTS setting is set correctly.

Check that the TVNIDEO button is set correctly.

Check that "SPEAKER ON" is set.

Is the battery used up?

Is the cordless headphones power turned on?

Adjust the cordless headphones volume control.

Make sure HEADPHONES is set to ON.

Is the battery used up?

Remove obstacles between the infrared emitter and the cordless headphones.

Is the infrared detector covered by your hands, hair, etc?

Adjust the direction and the position of the infrared emitter.

Is POWER switched on?

Plug the unit into a wall outlet.

Check that the TVNIDEO button is set correctly.

Make sure S VIDEO is set to on.

Is it a color program?

Adjust COLOR.

Is it an active or the correct channel?

Check the CABLE setting.

Check antenna/cable connections.

This is often caused by local interference. (e.g. cars, neon signs, hairdryers etc.) Adjust the antenna for minimum interference.

Reflections from nearby mountains or buildings often cause this problem. A highly directional outdoor antenna or a CATV cable may improve the picture.

channel, it could be station trouble.

facility.

Sony Corporation Printed in U.S.A.

Image 48
Contents TrinitronColorT Precautions LlttF3TableofContents IntroducingtheSonyTrinitron ColorTV Video input JackIdentifyingYourTV IivJ Check the model number of your TV setYES Identifying Your KV-21STR2LocatingtheControls E,e-,oVolume + Locatingthe ControlsKV-20TS29 KV-201S32 KV-20R23 StereoVideo 1 in jacks IR Emitter terminal Video 1 in jacksKV-20TS32 KV-20TS29* KV-2170RS* KV-21STR2 KV-20TS50 To avoid damage from possible battery leakage Locating the ControlsRM-Y116 Notrecharge,disassemble,or disposeof in fireConnectingTVAntenna/Cable Attach the supplied antenna connector Loosen both Screws onRearPlug ofthetheconnectorTV. into the VHF/UHF terminal at Ohm coaxial cable roundConnectingTV Antenna/Cable Use the EAC-66 U/V mixer not suppliedRear.£ofTV To the end of the dipole antenna cableUsingtheOn-ScreenMenus Auto Program CH ERASE/ADD ADDIL%1/TEXTOFF FCIAudio Time SET UP English Repeat the above, until you reach the main n=euUse € Exitl Using the On-Screen Menu Video Audio Time Hora SET UP Ajustes English EspaolTime SET UP Use Exltk Usar € Sa I irPress A+ or V- to select SET UP Video Audio TimeUse #I Exltlil Auto Program CH ERASE/ADD CH CAPTION/GUIDE Video MenuPresettingTVChannels Press A+ or V- to select SET UP Press ReturnUse €1 Exit Press A+ or V- to select Auto Program Use Exit ll Receivable channels for this TVVideo Audio Time SET UP Closed Caption Auto Program CH ERASE/ADD CH CAPTION/GUIDE VideoUse #IT Exltl Use #i ExitlUse #ll ExltW Presetting TV Channels Select the channel Use € Exiting1Select Exiting1ConnectingOtherEquipment After connecting, you will be able to play back video tapesKV-2OTSSO To S Video YC-15V/30Vnot supplied RK-74A notsuppliedTo audio output Output k\ \it n/lWDEO2 =NPUT To headphones 222223KV-20TS32 only Use € I ExitlUse # Exlt Use # Exit lTo scan the preset channels* in numerical sequence To select a channel directlyFor example, to select channel 14, press 1,4 and Enter UsingConvenientFeatures Sleep OFFAdjustingPictureandSoundQuality Vo,cVideo PI Cture Iiiiiiiiiiiiiiiiiiihiiiiiiii HUE Color DmenuBrightness To restore the factory mid-level setting To adjust other itemsBrightness DarkerAdjusting Picture Select the Main mode to listen to Stereo soundSound UuulJty KV-20TS29/2170RS/21STR2/20TS32/20TS50 onlySelect the SAP mode to listen to Second Audio Programs Audio MTS SAP Speaker on MenuUse €I Exit Audio MTS Mono Speaker onKV-2OTS29/217ORS/21STR2/20TS32/20TS50 Only Audio MTS Main Speaker onAudio MTS Main Speaker on Speaker OFF Menu Use € Exit Use €1 Exiting1 Press ReturnUsingClosedCaptionU.S.A.modelsonly TEXT1 TEXT2TEXT2 Closed Caption Menu UsintheTimerl-ActivatedFunctions Onioff Timer Channel BlockPress A+ or 7- to select Time Use ExitlCurrent Time SET MONTimer Use Exiting1MON 315 PM Use ! Exltl RM-Y116 1200AM -h CHON/OFF Timer Every MON-FRI Every MON-FRON/ OFF T I MER Time Current Time SET ON/OFF Timer Channel Block Menu Vo,OcReturn EVERYSUN-SAT Every Sunday BlockedCustomizingtheScreenDisplay Use ExitfiCH CAPTION/GU IDE Use € ExttTo caption other channels Repeat stepsEspn CH CaptioniguideCvLcQ Customizingthe Screen DisplayUsingtheCordlessHeadphonesKV-2OTS50only To avoid damage from possible battery leakageTerminalPlugthe. infrared emitter cable into the IR Emitter Audio MTS Main Speaker on Headphones OFF Use #l ExitUse €1 Exiti Use € I ExittSpecifications KV-21STR2Troubleshooting Causes and .....remedies