Sylvania SRTD319 owner manual Connecting to a Dolby Digital Decoder for DVD

CONNECTING TO A DOLBY DIGITAL DECODER (for DVD)

If using this TV/DVD to play a DVD disc in a 5.1 channel Dolby Digital surround format, the TV/DVD out- puts a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the player up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound as enjoyed in movie theaters.

Use audio coaxial digital cables available at retail for the audio connections.

Center speaker

Front speaker	Front speaker
(left)	(right)

L

AUDIO OUT R

COAXIAL

ANT.

VIDEO OUT

Dolby Digital decoder	To COAXIAL DIGITAL
	AUDIO INPUT jack
Surround	Surround	Subwoofer
speaker	speaker
(left)	(right)

NOTES:

To DIGITAL AUDIO OUT (PCM/BITSTREAM) COAXIAL jack

[Fig. 9]

•Be sure to turn off the power to all components in the system before connecting another component.

•Refer to the Owner's Manuals for the components to be connected to the TV/DVD.

•If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode. (See page 29 to set DOLBY DIGITAL to ON.)

•Unless connected to a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion, and may also damage the speakers.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

– 13 – EN

0C28