Manhattan Computer Products DS 100 3EVERYDAY USE, Turning on the Receiver, Changing Channels

3EVERYDAY USE

This section describes the day-to-day use of your Plaza DS•100 receiver – how to choose the channel you want to watch and how to control the basic features of your Plaza DS•100 receiver.

TURNING ON THE RECEIVER

You turn on the Plaza DS•100 receiver by

pressing the button on the remote

control or the button on the front of the receiver. The power light on the front of the receiver changes from red to blue when the receiver is on.

You turn the Plaza DS•100 receiver off, so it goes

into standby, by pressing the button on the remote control or thebutton on the receiver. When the receiver is in standby, the power light on the front of it glows red. The Plaza DS•100 uses less power when it is in standby.

HINT: You should leave the Plaza DS•100 receiver plugged in, with the socket switched on,atalltimes(exceptwhenthereislightning

–see appendix A). If you are not using the receiver, put it in standby by pressing the

button on the remote control or the button on the front of the receiver.

CHANGING CHANNELS

Flick through channels by pressing the and buttons on the remote control (or the CH– and CH+ buttons behind the fold-down flap on the front of the Plaza DS•100 receiver).

Pressing the or CH+ button will select the next channel in the channel list. Pressing the or CH– button will select the previous channel in the list. When you have chosen the last channel in the list, pressing the or CH+ button will select the first channel in the list. Similarly, when you are on the first channel, pressing the

18