Manhattan Computer Products DS 100 manual Appendix B Troubleshooting, Possible Cause What to do

Page 46

APPENDIX B – TROUBLESHOOTING

	PROBLEM	POSSIBLE CAUSE	WHAT TO DO
	Power light off	Power cable disconnected	Check the power cable.
	Power light off	Mains fuse blown	Check the fuse.
		Mains fuse blown	Check the fuse.
			Switch on the receiver, check the
		Receiver not switched on	power cable, the switch at the
	No set up		socket and the fuse.
	No set up	SCART lead disconnected	Check the SCART lead is connected
	screen		Check the SCART lead is connected
	screen		to the receiver and the TV.
			to the receiver and the TV.
		Television not switched to SCART input	Choose the TV’s SCART input (see
		Television not switched to SCART input	the TV manual for guidance).
		Cable from the satellite dish	Check the cable connections at the
		Cable from the satellite dish	receiver and the dish. Consult your
		disconnected	receiver and the dish. Consult your
		disconnected	installer if necessary.
	Signal strength		installer if necessary.
	Signal strength	Cable from the satellite dish faulty	Replace the cable from the satellite
	below 50%		Replace the cable from the satellite
	below 50%		dish. Consult your installer if necessary.
			dish. Consult your installer if necessary.
		Dish in the wrong position	Reinstall the dish. Consult your
		Dish in the wrong position	installer if necessary.
			installer if necessary.
		Cable from the satellite dish	Check the cable from the dish.
	‘No signal’	disconnected	Consult your installer if necessary.
	message	Dish damaged or in the wrong position	Check the dish. Consult your installer
		Dish damaged or in the wrong position	if necessary.
			if necessary.

46

Image 46

Contents User Guide Congratulations Further Information Freesat ManhattanContents 1In The Box Manhattan Plaza DS100 Switch the receiver on and offYour Receiver FrontInput for connecting to the satellite dish Mains power output for connecting to the mains supplyOutput for connecting to the TV BackRemote Control Page 2PREPARATION Satellite DishConnecting Your Receiver Cable is fitted with a wall socket inside yourConnecting Your Receiver Page Switching on Turn your TV set on and choose the correctTuning Tuning Page Turning on the Receiver 3EVERYDAY USEChanging Channels Use the browsing bar at the bottom of the TV screen see Use the electronic programme guide seeInformation BAR Changing the VolumeYou can turn the volume up or down using Button againSubtitles and Audio Description Browsing Channels and ProgrammesBrowsing Channels and Programmes PressUsing the Channel List Can press the button to leave the region setting the same Regional ChannelsUsing the Programme Guide Until it highlights the section you want, then pressUsing the Programme Guide You can use the interactive services by pressing Interactive TV ServicesTo watching TV by pressing the or button Interactive TV Services Recording Freesat ProgrammesFull widescreen 4ADVANCED USETV Screen Size Broadcast pictureUsing the Menu System TV/DTVLock Code Changing the Channel ListChannel Using the Favourite Channels List List of channels displayed, useUsing the Favourite Channels List By pressing the button SettingsTo make changes to any of the settings, first KEY BeepAuto Standby Genre SettingOn. Use the and buttons to move Scart Output Parental Settings Menu Transparency SettingsRestoring ALL Settings Receiver UpgradeSetting is then confirmed on-screen Changing the RECEIVER’S LanguageThen press . Press to return to watching TV Changing the RECEIVER’S LanguageReceiver Information Tuning in NON-FREESAT Channels 5NON-FREESAT ChannelsSettings menu by pressing Tuning NON-FREESAT ChannelsWatching NON-FREESAT Channels Temperature and Moisture Appendix a SafetyPower CablesVentilation CleaningReplacement Parts Heat and FlamesProtecting the Environment Blue Neutral Brown LiveBatteries at many supermarkets Appendix B Troubleshooting Possible Cause What to doVisible No picture orSound ChannelHelpline PowerDimensions Video