Sylvania H2160SL9 owner manual To stop the timer recording in progress, Press Timer PROG. to exit

	TIMER RECORDING
	How to select a channel number for the timer recording
Analog TV	For channel number 2-6, press [B] or [ – ] to decide the channels. For other channels (7-69), the
	channel will be decided as soon as you enter the channel number.
Analog CATV	For channel number 1-12, press [B] or [ – ] to decide the channels. For other channels (13-125),
	the channel will be decided as soon as you enter the channel number.
Digital TV	For major channel number 1-9, press [B] or [ – ] to decide the major channels. For other major
	channels (10-99), the major channel will be decided as soon as you enter the major channel number.
Digital CATV	For major channel number 1-13, press [B] or [ – ] to decide the major channels. For other major
	channels (14-135), the major channel will be decided as soon as you enter the major channel number.
minor channels	For channel number 1-9, press [B] or [ – ] to decide the channels. For other channels (10-99), the
	channel will be decided as soon as you enter the channel number.

<Hint>

•You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number. e.g.) “5”: [0]+[5]

•For selecting the channels with [K / L], you need to press [B] or [ – ] to decide the channel number.

•For selecting the minor channels with [K / L], please make sure the minor channel you are selecting is existing. [K / L] does not skip the non-existed minor channels.

Disc Introduction Connections Basic Setup Management

Checking, canceling, or correcting the timer programming information

1)Press [POWER].

2)Press [TIMER PROG.].

3)Check the information on the list you want to edit.

Timer Programming

JAN/ 2/08 12:00 AM 125-01 SP
SP (1:00)			TUE JAN/01 10:00AM
Date	Start	End		CH
JAN/02	12:00AM	1:00AM DTV 125- 1
	New Program
				1/1

4-A) To delete the timer program:

1 Use [K / L] to select the program you want to delete, then press [ENTER].

2 Use [K / L] to select “Delete”, then press [ENTER].

3 Use [K / L] to select “Yes”, then press [ENTER].

4-B) To correct the timer program:

1 Use [K / L] to select the program you want to correct, then press [ENTER].

2 Use [K / L] to select “Program Change”, then press [ENTER].

3 Correct the timer program by using [K/ L/ {/ B], then press [ENTER].

5) Press [TIMER PROG.] to exit.

To stop the timer recording in progress

Press [C STOP] on the front panel of the unit or press and hold [STOP C] on the remote control for 2 seconds.

If the timer program did not complete correctly, the error number appears in the timer pro- gramming list.

				Timer Programming
							TUE JAN/01 10:00AM
				Date	Start	End		CH
			E40	JAN/02	12:00AM	1:00AM DTV 125- 1
					New Program
								1/1
Each error number means:
	E1-22	Recording error other than below
	E37-39
	E25-26	Copy prohibited program
	E30	Disc full
	E40	Some portion has not been recorded because of
		program overlapping. Recording did not start at the
		start time.
	E41	Power failed
	E47	Already 600 titles recorded on the HDD
	E49	There was no disc space on the HDD at the starting
		time for the HDD timer recording.
	E50	HDD recording is canceled due to the insufficiency of

the disc space on the HDD.

•E23-24, E27-29, E31-36, E42-46 and E48 are not displayed.

•A program with the error number is grayed in the timer programming list.

•Once the timer programming list with error line(s) is displayed, or after canceling and setting again the timer standby mode, the program line(s) with error will be cleared.

Recording Playback Editing Function Setup Others

Note

•Press [TIMER PROG.] to check the timer recording in progress.

EN 51

Español