Sylvania DVR90DE Connections, Connection to antenna, Antenna and antenna cable are not included

Page 16

Connections

Use a standard antenna cable to connect the wall jack to the TV ANTENNA IN jack on the DVD recorder.

Connection to antenna

Note:

Antenna and antenna cable are not included.

TV

VHF/UHF

IN

DVD Recorder

2 RF cable (supplied)

: signal flow

Antenna

antenna

1cable

ANT.

IN

ANT.

OUT

1

Use a standard antenna cable to connect the wall jack to the TV ANTENNA IN jack on the DVD recorder.

2

Use a standard antenna cable to connect the TV ANTEN- NA OUT jack on the DVD recorder to the antenna input jack on the TV.

When connecting to a cable box with only a few scrambled channels

If you are using a cable box or satellite receiver with only a few scrambled channels, follow the setup on this page. If many or all the channels are scrambled, we recommend using the setup on the follow- ing page.

Note:

Antenna and antenna cable are not included.

A piece of RF cable is included.

With this setup:

•You can record any non-scram- bled channel by selecting the channel on the DVD recorder.

•You cannot record scrambled channels that require a cable box.

1

TV

VHF/UHF

IN

1DVD Recorder

RF

cable

Cable box

VHF/UHF

OUT

: signal flow

To Antenna

antenna 1 cable

ANT.

IN

ANT.

OUT

1 RF cable (supplied)

VHF/UHF

IN

Use a standard antenna cable as shown.

Note to the Cable TV

System Installer :

This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible.

16

Image 16

Contents Please read before using this equipment DVR90DETable of contents Important Safeguards Precautions About CopyrightFeatures Before you startWhen using a DVD-RW When using a DVD-REasy understanding for DVD recording Choose a disc typePlay the recorded con- tents Record to DVD discsEdit the recorded disc SETUP/DISC/CD menu Guide to DisplaysEdit Accessories Installing batteries in the remote controlSnap the battery cover back Audio/Video cablesUsing a remote control Operation of the remote controlInformation on this owners Manual Ual14 15 Before you start Location of controlsFront Panel AC in Power inlet Rear PanelRemote Control Front display Display messageUse a standard antenna cable as shown System Installer ConnectionsConnection to antenna Antenna and antenna cable are not includedUse a standard antenna cable as shown Connection to other devices Connection to TV with a standard A/V cableConnection to TV with a S-Video cable Connection to TV with a component video cableUse a component video cable to connect the Compo Recorder to the audio input jacks on the TVConnection to TV and VCR VCRCenter Channel setting Switching on Initial settingGetting started Getting channels auto- matically Select Manual Preset using Buttons, then press Enter button Manual Preset menu will appearUsing K / L buttons, then press Enter button Adding/deleting chan- nelsInitial setting Clock Setting the clockPlay SETUP/DISC menu Select Clock Setting using Enter button Press Setup button to dis Buttons, then pressButtons, then press Enter Select the time using K / LButton Adjusting the clock automatically Select Auto using K / LOption window will appear OFF has been selected asSelect on or OFF using Buttons, then press Enter button Setting the daylight sav- ings timeDaylight Saving Time options will appear Select TV Aspect using K Buttons, then press Enter button Initial setting Selecting the TV aspect ratioLetter Box, 43 Pan & Scan More than Front display RemoteSec Getting started What is CPRM? RecordingInformation on DVD recording Recording speedSettings for record- ing to a blank disc Video mode has been selected as the defaultSelect Video or VR using Buttons, then press Enter button Select Auto Chapter usingSelect Disc using / B buttons, then press Enter button Formatting a discVideo mode VR modeFormatting will start Formatting is completeWhen a DVD-RW disc is loaded When a DVD-R disc is loadedSelect a recording speed using REC Speed button Recording fromOne-touch timer No space remained on the disc When a power failure occursRecording Ing picture quality Recording will startFinalizing the discs Video modePress REC Monitor button again to exit Select Yes using / B buttons, then press Enter button Finalizing is completeDisc menu Select Yes, then press Enter buttonVR mode Timer recording Press Setup button to exit Disc menuPress Timer PROG. button If you have not made the clock setting yetPress Enter button when all information required is entered Press Power button to turn the DVD recorder offButtons DateDuring the timer recording, press Timer PROG. button Check the end time onWhen the recording time is partially overlapped When the starting time is samePriority of overlapped setings Setting a disc to pro- tect Disc will be protectedRecording from an external component Before attempting to record from an external componentPress Pause F button Press Stop C button onSelect the input of the DVD Recorder which the compo Nent to record from is conPlaying discs Information on DVD playPlayable discs Region codesSelect a desired title using K Basic PlayPress OPEN/CLOSE a but- ton to open the disc tray Press TOP MENU/ORIGI- NAL button to display the title menuPress Stop C button to stop play Press Stop C button to stop playingB buttons Press Menu Play List but- tonPress Menu Play List but- ton to exit the menu Press TOP Menu button to exit the title menu Press TOP Menu buttonTOP Menu button Resume play Step by step play- backPause Repeat play TitleChapter AllTrack ZoomDuring play, press Zoom button Using Skip H / G buttons Using Display buttonSelect icon using / B button, then press Enter button Title/Chapter searchTrack search Time search Using Skip H / GButtons Reverse search Slow forward / Slow reverse playGrams without interrupting Are playing Audio menu will appearAudio channel will switch Audio soundtrack will switchAudio channel menu will appear Display menu will appear Screen Switching subtitlesSubtitle menu will appear Switching camera angles Reducing block noisePlaying discs Editing Information on disc editingEditing discs Deleting titlesButtons, then Press Enter button Edit menu will appear Titlelist will appear ScreenPress 6 twice using number Buttons Putting names on titlesSelect abc using K / L but Four times using number butTons, the press Enter button Press 3 twice, 9 onceSetting or clearing chap- ter markers DVD-RWVR Original Deleting titles Disc menu will appear ScreenOriginal menu will appear Original list will appearSelect Scene Delete using Buttons, then press Select Original using / B buttons, then press Enter buttonSelect Delete using K / L buttons, then press Enter button Deleting parts of titlesPart of a title will be deleted You can put title names on Titles and change the names fromUsing K / L buttons, then Select Edit Title NameName you entered will be activated for the title Window for entering a titleSelect Add using K / L buttons, then press Enter button Select Chapter Mark using Buttons, then press Enter buttonButtons, then Press Enter button Original menu will appear Setting pictures for thumbnails Chapter marker will be addedSetting titles to protect To prevent accidental recordingEditing, or erasing the titles, you Buttons, thenReleasing titles from protecting Select Disc Protect from Disc menu, then select YesVR mode, even when a title is Select PlayList using / B buttons, then press Enter buttonDVD-RWVR Playlist Deleting titles Playlist will appearSelect Title Delete using K Option window will appearSelect Scene Delete using Buttons, then press Enter button Select Delete using K / LDisc Setting or clearing chap Ter markersYes JAN/ 1 100AM CH12 Buttons, then Press Enter button Playlist menu will appear Picture for thumbnail will be setAdding titles to a playlist Select Delete PlayList Using K / L / / B buttons Deleting a playlistThen press Enter button Playlist will be erasedTitle Delete Titlelist will appear Screen Alphabet window will appear Refer to page xx for details Option window will appearUsing Setup menu Other settings Parental Lock Setting a parental lock levelThis feature may not be available to some discs Select PlayBack using K Buttons, then press Enter buttonWhen you first change When you already set your own passwordSelect Yes, then enter a new password Enter your own passwordWhen selecting No, the cur Rent password is still effectiveSelect Playback using K / L Buttons, then press Enter button Choosing the menu lan- guageSETUP/DISC menu will appear Play SETUP/DISC menuChoosing the audio lan- guage Choosing the subtitle language Select OFF to switch subtitles off the screen Setting digital audio out- put Other settings Audio settingsSelect Digital Out using K Buttons, then press Enter button When your amplifier/decoder Select 48kHz using K / LButton Press Setup button to exit Setup menu 96kHzSelect on or OFF using Buttons, then press Enter button. On Compressing the range of sound volumeRange of sound volume will be compressed Outputting the sound during play in fast for- ward Sound will be output during play in fast forwardSelect Setup using / B Your setting will be activatedSetup menu will appear You can setup the OSD screenOSD Language Screen SaverFL Dimmer Select a desired option, then press Enter buttonOthers Troubleshooting102 103 PlaybackQuick Guide to DVD disc types 104Language code 105Others Glossary Limited Warranty