Sylvania 6626LCT owner manual Preparation for USE Connection, Antenna Cable Connection

Page 8

PREPARATION FOR USE

CONNECTION

This section describes how to connect this TV to reception and other sources.

MAKE SURE YOU HAVE AN ANTENNA

As DTV is only available over the air, you need an antenna to receive digital signal.

NOTE:

Be sure that antenna or cable is connected properly before plugging the power cord.

[ANTENNA CABLE CONNECTION]

1)When connecting TV to antenna

Connect the RF cable or antenna cable on your home outlet to the ANT. IN jack of this TV.

2)When connecting TV to RF/Incoming cable (without box)

Connect the RF cable or incoming cable on your home outlet to the ANT. IN jack of this TV.

Aerial

 

antenna

RF Cable

 

Cable TV

Incoming Cable

signal

 

 

Cables not included

or

ANT. IN

Rear of this TV

NOTES:

For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT. IN jack before moving the unit.

If you use an antenna in order to receive analog TV, the same antenna generally will work for DTV reception. Outdoor or attic antennas will be more effective than set-top versions.

To easily switch between antenna and cable wires, you can purchase “Antenna Selector” commercially available.

*Once connections are completed, turn on the TV and begin initial setup.

Channel scanning is necessary for the TV to memorize all available channels in your area if using antenna or RF/Incoming cable. (Refer to “INITIAL SETTINGS” on page 12.)

[CONNECTION TO CABLE/SATELLITE BOX]

1)Connect the antenna cable on your home outlet to the input jack of the CABLE/SATELLITE box.

2)Use the corresponding cable to connect the ANT. IN jack of this TV and the output jack of the

CABLE/SATELLITE box.

*Required cables in 2) and connecting methods differ depending on the CABLE/SATELLITE box. For more informa- tion, please contact the store where you purchased the CABLE/SATELLITE box or nearby electric appliance stores.

Satellite antenna

CABLE Box

or SATELLITE Box

Cable TV or signal

Cables not included

RF Cable

ANT. IN

Rear of this TV

*If you connect cable system directly, contact the CATV installer.

8

EN

Image 8
Contents 6626LCT a 6626LCT Important Safeguards Dealer Phone No PrecautionsSafeguards / Precautions Supplied Accessories FeaturesDTV/TV/CATV ChipContents To select TV or external input mode to Access DVD, VCR, etcAnalog mode TV To select audio modeFunctions Installing the BatteriesBattery Precautions Connection to CABLE/SATELLITE BOX Preparation for USE ConnectionAntenna Cable Connection External Connection Hdmi ConnectionComponent Connection Video ConnectionAudio Output Connection Analog AUDIO/VIDEO ConnectionPreparation for USE Initial Settings Initial SettingsLanguage Selection Autoscan TV/DTVPress Enter Channel Settings AutoscanInitial Settings / Channel Settings Channell Listi To exit the setup, press SetupChannel List Channel Settings Select Register with Enter To exit the setup, press SetupManual Register Manual l RegisterAntenna Confirmation AntennaLanguage Press Enter To exit the setup, press SetupLanguage Selection Volume Adjustment Watching TV Channel SelectionNtsc AtscWatching TV Still ModeSelecting Audio Channels Switching External Input When using VIDEO2 or S-VIDEO2 Input jackWhen using COMPONENT1 Input jacks When using COMPONENT2 Input jacksSidebar FullCinema WideBuffy Vampire i Slayer l Screen InformationTo clear the display, press Back or Info again Sleep Timer Optional Settings Setup ScreenWatching TV / Optional Settings Refer to Language Selection onPicture Adjustment Caption Mode CC1 and Text1 Closed CaptionCC3 and Text3 CC2, CC4, Text2 and Text4Style Using K/L, select the desired DTV Closed DTV Closed CaptionSelect CC Style and press Enter to confirm Closed l CaptionSettings OptionalChip See the following description for setting each itemPress Enter Password entry screen is displayed Optional Settings Set the method of sound input for Hdmi jack Chipip Enter password Confirm passwordHdmi Audio Optional Settings / Miscellaneous Miscellaneous Attaching a Wall Mount Bracket Sold SeparatelyTroubleshooting Guide Miscellaneous Maintenance GlossarySpecifications Miscellaneous / SpecificationsVHF UHF CatvLimits and Exclusions Warranty Statement Regarding NON Authorized RepairsDuration 6626LCT Para Recibir Señal Digital AnalógicaImportante Para SU Seguridad Precauciones PrecaucionesImportante Para SU Seguridad Accesorios Suministrados CaracterísticasIndice Garantia LimitadaSímbolos Empleados EN Este Manual IndiceFunciones Botones de Número de canal pág.15Nstalación DE LAS Pilas FuncionesCoaxial Precauciones Relacionadas CON LAS PilasConexión CON Caja DE CONVERTIDOR/CAJA DE Satélite Preparación Para EL USO ConexiónConexión DE Cable DE Antena Conexión Externa EL USOPreparación Para Conexión HdmiConexión DE Componente Conexión DE S-VIDEOConexión DE Salida DE Audio Preparación Para EL USOConexión AUDIO/VIDEO Analógica Preajustes Inicial Preajustes InicialSelección DE Idioma Autoscan se iniciará automáticamenteAjsute DE LOS Canales PREA. Auto CA Ajsute DE LOS CanalesPreajustes Inicial Presione EnterListai Canalesl Para salir del instalación, presione SetupLista DE Canales Registro Manual Manual lConfirmación DE Antena AntenaIdiomaI Presione Enter Para salir del instalación, presione SetupSelección DE Idioma Ajuste DEL Volumen Para Mirar TV Selección DE CanalSobre la emisión de subcanales Uso VOL. X/Y o Mute VOL. X/YModo DE Imagen Fija Cambio DEL Modo DE AudioSelección del modo de entrada Si usa el conector VIDEO-2 o S-VIDEO-2 InputSi usa el conector Component 1 Input Si usa el conector COMPONENT2 InputTotal CineAncha AmplíaInformación DE Pantalla Presione Info en el mando a distanciaPara borrar la pantalla, presione nuevamente Back o Info Inglés 1/2Ajustes Opcionales Pantalla DE Instalación Para Mirar TV / Ajustes OpcionalesAjuste del temporizador El temporizador se puede ajustar hasta 90 minutosAjuste DE LA Imagen Subtítulos Modo DE Título1 y Texto1 3 y Texto3Visualización de la pantalla de instalación Presione Setup Para salir del menu,presione SetupSubtítulos DE DTV Visualización de la pantalla de instalaciónAjustes Opcionales Con K/L, seleccione el elemento que desee AjustarColor Fondo Color FuenteSeleccione Detalle y presione Enter Introduzca contrasenaPara la clase sin subcategorías Selección Explicación de la categoríaTV-MA TV-PGPara salir del menú, presione Setup Audio HdmiAjuste el método de entrada de sonido para la toma Hdmi Chipip Introduzca contraseña Confirme contraseñaVarios # PrecauciónAjustes Opcionales / Varios Instale el TV en la paredGuía DE Localización DE Problemas Síntoma SoluciónProblemas con los Subtítulos VariosGlosario MantenimientoEspecificaciones Varios / EspecificacionesImportante DuracionLimites Y Exclusiones
Related manuals
Manual 72 pages 44.92 Kb

6626LCT specifications

The Sylvania 6626LCT is a versatile and high-performance lighting solution that has gained recognition in both residential and commercial applications. This compact fluorescent lamp, often categorized within the 26-watt category, is designed to provide energy-efficient illumination while delivering optimal brightness and color rendering.

One of the standout features of the Sylvania 6626LCT is its energy efficiency. Consuming only 26 watts, this lamp can produce light equivalent to traditional incandescent bulbs rated at 100 watts. This capability makes it an excellent choice for those looking to reduce electricity costs while minimizing their carbon footprint. Additionally, the lifespan of the Sylvania 6626LCT is impressive; it offers an average life of up to 12,000 hours. This longevity not only lessens the frequency of replacements but also contributes to lower maintenance expenses.

The Sylvania 6626LCT utilizes advanced compact fluorescent technology, which allows it to produce a significant amount of light while using less power. This technology also enhances its provide a better color rendering index (CRI), measured at 82. A higher CRI means that the lamp can render colors more accurately and vibrantly, making it suitable for tasks that require color precision, such as in art studios, retail spaces, or kitchens.

Another characteristic of the Sylvania 6626LCT is its quick start-up time. Traditional fluorescent tubes often require a warm-up period before reaching full brightness. However, the 6626LCT offers instant illumination, making it a practical choice for spaces where immediate light is necessary, such as entryways or workspaces.

The lamp's design focuses not only on functionality but also on aesthetics. With a neutral white color temperature of 3500K, the Sylvania 6626LCT creates a pleasant and inviting atmosphere without being too harsh or too warm, striking a balance that fits well in a variety of settings from homes to offices.

In conclusion, the Sylvania 6626LCT stands out for its energy efficiency, longevity, advanced technology, impressive color rendering capabilities, and appealing design. Whether you're looking to upgrade your home lighting or enhance the ambiance of a commercial area, the Sylvania 6626LCT is a reliable and effective choice that meets diverse lighting needs while promoting sustainability and cost savings.