Sylvania LD155SC8 owner manual Basic Connection, Antenna Cable Connection

Page 10

CONNECTION

Cables not included.

Please purchase the necessary cables at your local store.

5Basic Connection

This section describes how to connect the unit to an antenna, cable/satellite box, etc.

Note:

• Be sure your antenna or other device is connected properly before plugging in the power cord.

[Antenna Cable Connection]

When connecting the unit to an antenna or cable TV company (without cable/satellite box)

Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit.

e.g.)

VHF / UHF

antenna

rear of this unit

RF coaxial cable

or

cable TV company

*Once connections are completed, turn on the unit and begin initial setup.

Channel scanning is necessary for the unit to memorize all available channels in your area. (Refer to “Initial Setup” on page 13.)

Note:

For your safety and to avoid damage to device, please unplug the RF coaxial cable from the antenna input jack before moving the unit.

If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be more effective than set- top versions.

To easily switch your reception source between antenna and cable, install an antenna selector.

If you connect to the cable system directly, contact the CATV installer.

[Connection to Cable Box or Satellite Box]

Connect the RF coaxial cable on your home outlet to the input jack of the cable/satellite box.

Use another RF coaxial cable to connect the antenna input jack of the unit to the output jack of the cable/satellite box.

e.g.)

satellite dish

or

cable TV company

rear of this unit

cable/satellite box

ANT. IN RF OUT

RF coaxial cable

RF coaxial cable

*Required cables and connecting methods differ depending on the cable/satellite box. For more information, please contact your cable/satellite provider.

10

EN

Image 10
Contents LD155SC8 Introduction Important note is located on the rear of the cabinetRADIO-TV Interference PrecautionsLaser Safety Important Copyright InformationSymbols Used in this Manual Supplied AccessoriesTilt Stand General Specifications ContentsRepeat A-B Playback Features DTV/TV/CATVRemote Control Function Installing the BatteriesControl Panel Rear PanelAttaching a Wall Mount Bracket sold separately Attach this unit to the wallAntenna Cable Connection ConnectionBasic Connection Connection to Cable Box or Satellite BoxComponent Video Cable Connection External Device ConnectionVideo Cable Connection Video Connection Digital Audio Output ConnectionMake sure if the unit is connected to antenna or cable Initial SettingInitial Setup Scanning and memorizing the channels automatically startMain Menu Auto Channel ScanLanguage Selection Press Setup to exitEnglish Español Français Watching TV Volume AdjustmentChannel Selection Main Switching Each ModeSwitching Audio Mode SAPBroadcasting Information Screen InformationPress Display Program GuideTo Cancel the Sleep Timer TV Screen Display ModeSleep Timer LetterboxChannel Add/Delete Optional SettingPicture Adjustment Brightness Contrast Color Tint SharpnessClosed Caption Press Setup to display the main menuCaption Mode CAPTION1 and TEXT1 OFF CAPTION1 CAPTION2 TEXT1 TEXT25DTV Closed Caption EnterBack Light Setting Change Password Color TemperatureYou can adjust color temperature of the TV screen ChipUse Cursor K/L to select TV RATING, then press TV RatingTo Set the Sub Ratings Mpaa Rating Change PasswordEnter password again in Confirm PASSWORD. space Use Cursor K/L to select Mpaa RATING, then pressUnplayable Media Operating DVDDVD Functions Playable Media Any other discs without compatibility indicationsResume Playback PlaybackDVD Menu PauseSlow Forward / Slow Reverse Step-by-step PlaybackFast Forward / Fast Reverse 5ZoomSearch Functions During playback, press Mode repeatedly until appearsChapter / Title Search 5Repeat Playback Time SearchDirect Search 5Repeat A-B PlaybackRandom Playback Stop mode, press Mode repeatedly until Random menu appearsProgrammed Playback Press Play B to start random playbackOn-screen Display IntroductionAudio Language Special SettingsSubtitle Language Camera AnglesUse Cursor K/ L to adjust the black level Black Level SettingStereo Sound Mode Virtual SurroundMarker Setup To set a markerStop mode, press Setup to display TV Setup DVD SettingDVD Language Setting Default Original Select the desired audio languageUse Cursor K/L to select CUSTOM, then press Display SettingUse Cursor K/L to select DVD SETUP, then press Use Cursor K/L to select DISPLAY, then pressDVD Audio Setting Use Cursor K/L to select AUDIO, then pressParental Level Parental SettingUse Cursor K/L to select PARENTAL, then press Use the Number buttons to enter the 4-digitYou can change the other functions OthersUse Cursor K/L to select OTHERS, then press Use Cursor K/L to select INITIALIZE, then press Reset to the Default SettingLanguage Code List Use Cursor K/L to select YES, then press EnterTroubleshooting Guide Troubleshooting Atsc MaintenanceGlossary NtscOther Specifications General SpecificationsElectrical Specification InformationMemo Limited Warranty