Sylvania 6719DC SET UP for USE, Channel SET UP for First Time, Deleting or Adding Channel

Page 15

TV/VCR SECTION

SET UP FOR USE

You can program the tuner to scan all the channels you receive in your area.

NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/DVD/VHS channel selector to the output channel of the cable box or satellite box (Ex CH3). Then select the channel to be viewed on the Cable Box or Satellite Box.

CHANNEL SET UP FOR THE

FIRST TIME

1Plug in the TV/DVD/VHS power cord

Plug the TV/DVD/VHS power cord into a standard AC outlet.

NOTE:

DELETING (OR ADDING)

CHANNEL

The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.)

• If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord.

2Turn on the TV/DVD/VHS

Press the POWER button to turn on the TV/DVD/VHS.

1Select “CHANNEL SET UP”

Press the SETUP button on the remote control.

Press the Arrow K or L button to point to “CHANNEL SET UP”. Then, press the Arrow B button.

- TV/VCR SETUP -

TIMER PROGRAMMING SETTING CLOCK

BCHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH INDEX SEARCH

3Select “ENGLISH” or “ESPAÑOL” or

“FRANÇAIS”

– SET UP –

 

Select “ENGLISH” or

B LANGUAGE

 

“ESPAÑOL”=Spanish or

[ENGLISH] ESP

FRA

 

 

“FRANÇAIS” =French using the

AUTO PRESET

 

 

 

Arrow B or s button. “[ ]” indi-

 

 

cate the selected language.

 

 

 

 

 

4 Begin auto preset

– SET UP –

 

Press the Arrow K or L button to

 

LANGUAGE

 

point to “AUTO PRESET”.

 

[ENGLISH] ESP

FRA

Then press the Arrow B button.

B AUTO PRESET

 

The tuner scans and memorizes all

 

 

active channels in your area.

 

 

NOTES:

•The TV/DVD/VHS distinguishes between standard TV channels and cable channels.

•If you want to play or record a video tape BEFORE presetting the tuner, you must press the SETUP button on the remote control. To preset the tuner again, see “CHANNEL SET UP AGAIN” on page 16.

•The TV/DVD/VHS may memorize TV channels as CATV channels if reception conditions is poor. If this happens, try AUTO MEMO action again when reception conditions are better.

5After scanning

The tuner stops on the lowest memorized channel. If you want to recall the selected channels, you can select the desired channel directly with the remote control number buttons or CHANNEL K or L.

2 Select “ADD/DELETE CH”

– CHANNEL SET UP –

Press the Arrow K or L button to

B ADD / DELETE CH (TV)

point to “ADD/DELETE CH”.

AUTO PRESET

 

Press the Arrow B button.

3Enter the desired channel number

Press the Arrow K or L button until your desired channel number

appears. (You can also use the num-

08

 

ber buttons or the CHANNEL K/L

ADD / DELETE

button to enter it) (Example: CH8)

 

4Delete (or add) it from (into) memory

Press the Arrow B or s button. The channel number changes to light red. The channel is deleted from memory.

•To delete another channel, repeat steps [3] and [4].

•If you press the Arrow B or s button again, the channel is memorized again.

5Exit the channel setup mode

Added channel: Light blue.

Deleted channel: Light red.

Press the SETUP button on the remote control to returns to TV mode.

NOTE: To confirm that channel(s) has been deleted or added, press the CHANNEL K or L button.

- 15 -

EN

1C29

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 6719DC 6727DC Supplied AccessoriesImportant Safeguards S2 8 9 8 a RADIO-TV Interference PrecautionsLaser Safety Important Copyright InformationAvoid the Hazards Electrical Shock and Fire LocationwarningTable of Contents TV/VCR FeaturesDVD Operating Controls and Functions Press to insert discs into or remove them fromTray Activates program playback or random playback mode Press to adjust the picturePress to enter or exit the TV menu or DVD setup mode Resets a settingCable Without CONVERTER/ Descrambler BOX Preparation for USEANTENNA/CABLE Connection VHF/UHF Separate AntennasTo Record a SCRAMBLED/UNSCRAM- Bled Channel Connecting to External Input JacksInstalling the Batteries External Input ModeConnecting to a Stereo System for DVD DTS DECODER, or Mpeg Decoder for DVD Connecting to a Dolby Digital DecoderSET UP for USE Channel SET UP for First TimeDeleting or Adding Channel Selecting the Language Channel SET UP AgainTo Cancel the DAYLIGHT-SAVING Time DAYLIGHT-SAVING TimeAuto Clock Setting Clock SET UP Auto / ManualDate Manual Clock SettingTo Change Clock Setting Setting TimePicture Control TV OperationWatching a TV Program DegaussingCAPTION1, CAPTION2 To Cancel the Closed Caption SystemWhen the Closed Caption Mode is on Closed Caption SystemWhen you select TV-PG, TV-14 or TV-MA Chip SET UPTV Rating SET UP When you select TV-Y7Change Access Code Mpaa Rating SET UPSelection Checking the Selected MTS ModeMTS RECORDING/MONITOR Mode STEREO/SAPTo Select Hifi Mode To Select Mono Mode Selecting the MTS SystemTo Select STEREO, SAP, or Mono Video Cassette Playback Rental Playback To Cancel the Rental ModeTo Cancel the Repeat Play Mode Special PlaybackSearch Zero ReturnTime Search Auto REWIND-EJECT Special FeaturesIndex Search Real Time Tape CounterRecording Normal RecordingSkipping Unwanted Scenes During Recording 100 Minutes Pushes 800 Pushes Display Recording lengthPush Normal recording 030 MinutesTimer Automatic Timer RecordingChannel CH61 Tape Speed SP Timer Program Extension To Cancel AN Automatic Timer RecordingTo Correct a Program Hints for Automatic Timer Recording Sleep TimerAuto Return OFF mode Counter mode Clock mode Clock/Counter mode On Screen DisplayCable Channel Designations Playable Discs DVDAudio CD Calling UP a Menu Screen During Playback Using the DVD MenusUsing the Title Menu Playing a DVD Video Or AN Audio CDFast FORWARD/REVERSE Resuming Playback from Point Where Playback StoppedPausing Playback or Displaying a Still Picture Stepping Through FramesTricks with the Skip Buttons H, G Starting from a Desired Time Count¡Example 1 hour, 23 minutes Seconds → 2 → 3 → 3 → ¡Perform the title search¡The selected section Will be Repeat Played back repeatedly Repeat¡A single title or chapter is played back repeatedly You can define a section to be played back repeatedlyClear the marker MarkerSet the marker Call back the markerPlaying AN MP3 Disc When Tracks are selectedWhen an Album is selected Zoom PlaybackPlaying AN MP3 Disc in a Programmed WAY Playing AN MP3 Disc from a Desired Track¡Random play starts Changing the Audio Language or Sound Mode¡The random setting menu screen will appear Playing AN MP3 Disc AT RandomChanging the Camera Angle Multi-Angle Pictures Changing the Subtitle LanguageChanging the ON-SCREEN Display Black Level SettingsDisc Menu Language SettingsAudio SubtitleAuto Power OFF Default on Display SettingsWhen playing a disc with copyright protection Audio SettingsControl Levels If YOU Forget the PasswordAll parental lock is cancelled Parental LockInstead letter language code is written in bracket Language Code ListTroubleshooting Guide Problem Corrective ActionAdjust picture controls Normal time available for editing the captions Closed Caption Problem Possible RemedyTV/DVD Symptom Cause RemedyDisc Handling MaintenanceOther Specifications SpecificationsGeneral Specifications Electrical SpecificationsMemo Consulte la figura 3 de la página Controles DE Operación Y FuncionesConsulte la figura 1 de la página Consulte la figura 2 de la páginaRepone un ajuste Púlselo para introducir el número deseadoHace una pausa en la operación del disco o la cinta Visualiza el menú de títulosConexión a UN Sistema Preparación Para LA UtilizaciónInstalación DE LAS Pilas Conexión a Tomas DE Entrada ExternaConsulte la figura 8 de la página Repetición DE LA Preparación DE Canales Preparación DE Canales POR Primera VEZAjuste DEL Reloj ReseleccionReproducción DE UN DVD DE Vídeo O UN CD DE Audio ¡La alimentación se conectará¡La bandeja de carga del disco se abrirá 0EMN01908 DurationTel Please do not Ship Your Unit to the Teterboro Address
Top Page Image Contents