Sylvania SSC719B1 owner manual Playback

Page 26

PLAYBACK

NORMAL PLAYBACK

Make sure ...

•TV/DVD/VHS power must be turned on.

1Insert a prerecorded tape

If the erase-protection tab has been removed, the TV/DVD/VHS will start playback automatically.

2 To begin playback

PLAY B

Press the PLAY button.

3 To stop playback

STOP

Press the STOP button when play- back is completed.

NOTES:

•If you press the TV/VCR side PLAY button in the DVD mode, you can start the VCR playback.

•If you press the SELECT button in the VCR playback, it will stop and the mode will change to the DVD mode. In addition, the same function operates with the DVD side PLAY button or OPEN/CLOSE button.

TRACKING ADJUSTMENT

SLOW MOTION

During pause, press the FWD button to reduce the playback speed. The TV/DVD/VHS mutes the sound during slow motion. Press the PLAY button to return to normal playback.

NOTE: If it is left in the Slow mode for more than five minutes, the TV/DVD/VHS will automatically go into the Stop mode.

PICTURE SEARCH

This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted.

1)You may view a video tape at a high speed in either a forward or reverse direction by pressing the F.FWD or REW button. (in the SP / LP / SLP modes)

NOTE:

•If you press the F.FWD or REW button in the DVD mode, the VCR forward or reverse will start. Please press the STOP button to stop it.

2)Press it again and the TV/DVD/VHS will now search in super high speed. (in the LP / SLP modes only)

NOTE: Tapes recorded in the SP or LP mode will display a noise bar on the TV screen and the pic- ture may revert to Black and White. This is normal.

3)Press the PLAY button to return to normal speed.

STILL PICTURE

•Tracking adjustment will be set automatically (Digital Tracking function) when you start play- back.

•However when playing pre-recorded tapes or tapes recorded on units other than your own, noise lines (black and white streaks) may appear on the play- back picture. If this occurs, you can adjust the tracking control manually by pressing the CHAN- NEL K or L button until the streaks disappear. To return to the DTR function, stop the tape once and start playback again.

•You can reduce the noise lines by pressing the CHANNEL K or L button in slow mode, too. Tracking adjustment in Slow mode will not be set automatically.

NOTE:

•In Still mode, press the SLOW button and press the CHANNEL K or L button until streaks disappear. To return to Still mode, press the PAUSE button again.

You can view a still picture on the TV screen during playback (the Still mode). Press the PAUSE button during playback. Only tapes recorded in the SLP mode will show the least amount of lines.Press the PLAY button to return to playback.

NOTES:

•You can advance the picture one frame at a time by pressing the PAUSE button during the Still mode.

•If it is left in the Pause mode for more than five minutes, the TV/DVD/VHS will automatically switch to the Stop mode.

VERTICAL HOLD CONTROL

In the Pause/Still mode only, when the picture begins to vibrate vertically, stabilize the picture by pressing the CHANNEL K or L button.

NOTE:

If there are video noise lines on the screen, see Tracking Adjustment section.

- 26 -

EN

1F12

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Supplied Accessories SSC719B1Important Safeguards S2 8 9 8 a Important Copyright Information PrecautionsLaser Safety RADIO-TV InterferenceLocationwarning Avoid the Hazards Electrical Shock and FireTable of Contents Features TV/VCRDVD Operating Controls and Functions Resets a setting Press to adjust the picturePress to enter or exit the TV menu or DVD setup mode Activates program playback or random playback modeVHF/UHF Separate Antennas Preparation for USEANTENNA/CABLE Connection Cable Without CONVERTER/ Descrambler BOXExternal Input Mode Connecting to External Input JacksInstalling the Batteries To Record a SCRAMBLED/UNSCRAM- Bled ChannelConnecting to a Dolby Digital Decoder DTS DECODER, or Mpeg Decoder for DVDConnecting to a Stereo System for DVD Deleting or Adding Channel SET UP for USEChannel SET UP for First Time DAYLIGHT-SAVING Time Channel SET UP AgainTo Cancel the DAYLIGHT-SAVING Time Selecting the LanguageClock SET UP Auto / Manual Auto Clock SettingPlease Note Manual Clock SettingTo Change Clock Setting Degaussing TV OperationWatching a TV Program Picture ControlClosed Caption System To Cancel the Closed Caption SystemWhen the Closed Caption Mode is on When you select TV-Y7 Chip SET UPTV Rating SET UP When you select TV-PG, TV-14 or TV-MAMpaa Rating SET UP Change Access Code STEREO/SAP Checking the Selected MTS Mode MTS RECORDING/MONITOR Mode SelectionTo Select STEREO, SAP, or Mono To Select Hifi Mode To Select Mono ModeSelecting the MTS System Video Cassette Playback Special Playback To Cancel the Rental ModeTo Cancel the Repeat Play Mode Rental PlaybackZero Return TV/DVD/VHS power must be turned on Insert a tapeSearch Time SearchReal Time Tape Counter Special FeaturesIndex Search Auto REWIND-EJECTSkipping Unwanted Scenes During Recording RecordingNormal Recording 030 Minutes Pushes Display Recording lengthPush Normal recording 100 Minutes Pushes 800Timer Automatic Timer RecordingTo Correct a Program Timer Program ExtensionTo Cancel AN Automatic Timer Recording Auto Return Hints for Automatic Timer RecordingSleep Timer Cable Channel Designations OFF mode Counter mode Clock mode Clock/Counter modeOn Screen Display Following discs can be played back on this DVD player Playable DiscsDisc Types DVDPlaying a DVD Video Or AN Audio CD Using the DVD MenusUsing the Title Menu Calling UP a Menu Screen During PlaybackFast FORWARD/REVERSE Pausing Playback or Displaying a Still PictureStepping Through Frames ¡Playback will pause, with soundStarting from a Desired Track Starting from a Desired Time CountPlaying from a Desired Title or Chapter Tricks with the Skip Buttons H, G¡The starting point a will then be Repeat Selected RepeatYou can define a section to be played back repeatedly ¡The selected section Will be Repeat Played back repeatedlyZoom Playback Settings Changing the Audio Language or Sound ModeChanging the Subtitle Language Changing the Camera Angle Multi-Angle PicturesPlayback Setup Window CD Changing the ON-SCREEN DisplayLanguage Settings ¡The setup screen appearsDisplay Settings ¡The setup screen will appearAudio Settings ¡The setup screen will appearControl Levels If YOU Forget the PasswordParental Lock Language Code List Adjust picture controls Troubleshooting GuideProblem Corrective Action Closed Caption Problem Possible Remedy Normal time available for editing the captionsSymptom Cause Remedy TV/DVDMaintenance Disc HandlingElectrical Specifications SpecificationsGeneral Specifications Other SpecificationsMemo Consulte la figura 2 de la página Controles DE Operación Y FuncionesConsulte la figura 1 de la página Consulte la figura 3 de la páginaVisualiza el menú de títulos Púlselo para introducir el número deseadoHace una pausa en la operación del disco o la cinta Repone un ajusteConexión a Tomas DE Entrada Externa Preparación Para LA UtilizaciónInstalación DE LAS Pilas Conexión a UN SistemaPara DVD Consulte la figura 8 de la páginaPreparación DE Canales POR Primera VEZ Ajuste DEL Reloj¡La bandeja de carga del disco se abrirá Reproducción DE UN DVD DE Vídeo O UN CD DE Audio¡La alimentación se conectará Memo Memo 0EMN01946 DurationTel TD364UE
Top Page Image Contents