CLOCK SET UP
(AUTO / MANUAL)
Set the clock accurately for proper automatic timer recording. If the Public Broadcasting Station (PBS) is available in your area, follow “AUTO CLOCK SET- TING”. If it is not, follow “MANUAL CLOCK SET- TING”.
AUTO CLOCK SETTING
You can have the TV/DVD/VHS set the clock auto- matically by using the Public Broadcasting Station (PBS) channel in your area. Once you have set the clock by using the following procedure, the TV/DVD/VHS will automatically monitor the correct time and date being broadcast by the PBS station in your area, using a new service called Extended Data Service (XDS).
Make sure ...
•TV/DVD/VHS power must be turned on.
•Confirm that the antenna connections are correct.
•The cable converter box must be turned on if your TV/DVD/VHS is connected directly to it. (See NOTES:)
•The channel is properly set in advance. (See page 16.)
NOTES:
•Auto clock setting only needs to be set once. But it can be done again if the clock’s time has become incorrect for some reason.
•If the TV/DVD/VHS is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself, and the TV/DVD/VHS must be set to the output chan- nel of the cable converter box or satellite box (usu- ally channel 3 or 4), to be able to set up or correct the clock automatically.
If you do not know what your local PBS station is, then follow “Manual Clock Settings” on page 18. The TV/DVD/VHS cannot control the channels of the cable converter box or satellite box.
2 Set “AUTO CLOCK” to [ON] | – SETTING CLOCK – | |
Press the Arrow B or s button | B AUTO CLOCK | [ON] |
repeatedly until [ON] appears. | AUTO CLOCK CH | [AUTO] |
| MANUAL CLOCK SET |
|
| D.S.T. | [OFF] |
3Enter the channel number for the PBS station
Press the Arrow K or L button to
– SETTING CLOCK –
point to “AUTO CLOCK CH”.
Then press the Arrow B or s but- | AUTO CLOCK | [ON] |
AUTO CLOCK CH | [AUTO] | |
ton until the channel number for | MANUAL CLOCK SET |
|
your local PBS station appears. | B D.S.T. | [OFF] |
If you do not know the PBS channel number, leave it set to [AUTO] which is located before [2]. The TV/DVD/VHS will search automatically all available channels for the local PBS station, and will select that channel.
4Exit the Auto Clock Setting
Press the SETUP button on the remote control to return to TV mode.
5Turn off the TV/DVD/VHS
Turn the TV/DVD/VHS off. Because the Auto Clock functions automatically while the TV/DVD/VHS is off.
If you choose [AUTO],
•the TV/DVD/VHS must search until the PBS chan- nel is found. It must scan each channel for a couple of seconds to determine if that channel is transmit- ting the XDS signal.
•if the time, that is automatically set by this selected PBS station is incorrect, it may not be your local PBS station, but one from a different time zone. Or there is a case that no channel is broadcasting the XDS signal in your area, as shown by no time. In these cases, you must manually enter the correct local PBS station, or set the clock manually and turn off the Auto Clock Setting feature.
1Select “SETTING CLOCK”
Press the SETUP button on the remote control.
Press the Arrow K or L button to point to “SETTING CLOCK”. Then, press the Arrow B button.
- TV/VCR SETUP -
TIMER PROGRAMMING
BSETTING CLOCK CHANNEL SET UP USER’S SET UP
TIME SEARCH INDEX SEARCH
- 17 - | EN |
1F12