![When the unit is OFF.](/images/new-backgrounds/43994/4399419x1.webp)
GB
When the unit is OFF.
Follow the same procedure as above for the ON and if required continue to the OFF setting.
Cancelling the timer
In order to cancel the timer setting(s), push the TIMER BUTTON.
UV light (optional) ![Cancelling the timer](/images/new-backgrounds/43994/4399419xi2.webp)
Normally the blue UV light will be ON whenever the unit is connected to the electricity. In order to turn the blue UV light off, push the UV BUTTON, the UV light will go OFF and the UV icon on the LCD will disappear.
Pushing the UV BUTTON again will light the UV light.
When the front door opens, a micro switch cuts off the electricity.
Heater ![UV light (optional)](/images/new-backgrounds/43994/4399419xi3.webp)
The heating function may run together with the compressor or alone. The heater will run only when the room temperature is below 25 °C.
To operate the heating function, press the TEMP&HEAT BUTTON.
Room relative humidity
Normally the 2 digits indicate the relative humidity % in the room. If the relative humidity is lower then 35% the 2 digit icon indicate . If the relative humidity is higher then 95% the 2 digit icon indicate
.
Room temperature ![Room temperature](/images/new-backgrounds/43994/4399419xi6.webp)
Push the TEMP&HEAT BUTTON for 2 seconds and the LCD will indicate the room temperature.
SCENT EMITTER
The unit is supplied with a scent emitter to fragrance the air.
•take out the scent capsule from its bag
•take the scent emitter cover off by turning it and
pulling it out
• fix the capsule into its airy seat in the back of the unit
• return the cover to its place.
10