GB
CONTROLS
1.Humidity set mode.
2.High fan speed.
3.Low fan speed.
4.Dehumidification – compressor runs.
5.Timer set is on.
6.Setting the timer ON.
7.Setting the timer OFF.
8.Real time indication and timer setting(s).
9.Indication of room relative humidity and temperature.
In all units – to confirm or cancel the timer press the set button - it indicates the status as follows:
– cancels the ON timer. | – cancels the OFF timer. |
– confirms the 01 timer. | – confirms the 02 timer. |
10.Ultra violet light is on (where available).
11.Heating function is ON.
12.Water tank full.
13.Dual colour led indication.
1.When the unit is switched ON the led colour is BLUE.
2.When the water tank is full the led colour turns RED.
8
