JVC LPT0543-001A, SR-VS20EK OUTPUT/INPUT Setting, Select Setting, For L-1 Output, For L-1 Input

50ADVANCEDOPERATIONS (cont.)

L-1 OUTPUT/INPUT Setting

The AV1 (L-1) IN/OUT connector accepts and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set "L-1 OUTPUT" and "L-1 INPUT" to the appropriate mode depending1 on the type of unit connected to the rear panel AV1 (L-1) IN/OUT connector of this recorder.

2Press MENU to access the Main Menu screen.

3Press %fi to move the highlight bar (pointer) to "OUTPUT/INPUT SET", then press OK or #.

4Press %fi to move the highlight bar (pointer) to "L-1 OUTPUT" or "L-1 INPUT".

For "L-1 OUTPUT"

Press OK or # to select "VIDEO" or "S-VIDEO".

a–VIDEO	: If a connected device's input is compatible only with regular video signals,
	set to "VIDEO".
b–S-VIDEO	: If a connected device's input is compatible with Y/C signals, set to
	"S-VIDEO". This setting will let you take advantage of higher-quality
	S-VHS pictures. (For connection, be sure to use a 21-pin SCART cable that
	is compatible with the Y/C signal.)
For "L-1 INPUT"
Press OK or # to select "VIDEO" or "S-VIDEO".
a–VIDEO	: If a connected device's output is compatible only with regular video
	signals, set to "VIDEO".
b–S-VIDEO	: If a connected device's output is compatible with Y/C signals, set to
	"S-VIDEO". This setting will let you take advantage of higher-quality
	S-VHS pictures. (For connection, be sure to use a 21-pin SCART cable that
5	is compatible with the Y/C signal.)

Press MENU to return to normal screen.

●If "L-1 OUTPUT" is set to "S-VIDEO", it is impossible to set "L-1 INPUT" to "S-VIDEO".

●If "L-2 SELECT" is set to "DECODER", it is impossible to set "L-1 INPUT" to "S-VIDEO".

	OUTPUT/INPUT SET
L-1 OUTPUT		VIDEO
L-1	INPUT	VIDEO
L-2	SELECT	A/V
VHS
F-1	INPUT	VIDEO

[5∞] = [MENU] : EXIT

L-2 SELECT Setting

Set "L-2 SELECT" to the appropriate mode depending on the type of unit connected to the rear panel AV2 (L-2) IN/DECODER connector1 of this recorder.

2Press MENU to access the Main Menu screen.

3Press %fi to move the highlight bar (pointer) to "OUTPUT/INPUT SET", then press OK or #.

4Press %fi to move the highlight bar (pointer) to "L-2 SELECT". Press OK or # to select "A/V", "DECODER" or "SAT".

a–A/V	: To use this recorder as the recording deck with the player connected to the
	AV2 (L-2) IN/DECODER connector, or to use the satellite receiver con-
	nected to the AV2 (L-2) IN/DECODER connector.
b–DECODER	: To use a decoder connected to the AV2 (L-2) IN/DECODER connector.
c–SAT	: To view a satellite programme with the TV set while the recorder is turned
5	off. ( pg. 59)

	OUTPUT/INPUT SET
L-1 OUTPUT		VIDEO
L-1	INPUT	VIDEO
L-2	SELECT	A/V
VHS
F-1	INPUT	VIDEO

[5∞] = [MENU] : EXIT

Press MENU to return to normal screen.

●If you have a satellite receiver or a decoder connected to the AV2 (L-2) IN/DECODER connector, be sure to set "L-2 SELECT" back to appropriate mode after editing.

●If you're not connecting a satellite receiver or a decoder to the AV2 (L-2) IN/DECODER connector, leave "L-2 SELECT" set to "A/V".

●The default setting is "A/V"; if the recorder's memory backup has expired due to a power cut or because the AC was removed from the recorder, "A/V" will be automatically selected when the power is restored to the recorder. If you are using a satellite receiver or a decoder, be sure to set "L-2 SELECT" back to appropriate mode.

●When "L-2 SELECT" is set to "SAT", "SAT" appears on screen or display panel instead of "L-2" or "L2".

●If "L-1 OUTPUT" is set to "S-VIDEO", it is impossible to set "L-2 SELECT" to "DECODER".