JVC SR-VS20EK, LPT0543-001A setup guide TV Receiver AV mode, Your recorder, Recorder Player

					45
A TV Receiver			B		TV Receiver
(AV mode)	Player	Your recorder	Recorder	Your recorder	(AV mode)
		21-pin SCART Cable	21-pin SCART Cable	21-pin SCART Cable
		(not provided)
			(not provided)	(not provided)
21-pin SCART Cable
(not provided)
		Another recorder	Another recorder
	Recorder		Player
C TV Receiver
(AV mode)	Recorder	Your recorder
	S-Video Cable
	(not provided)	21-pin SCART Cable
		(not provided)
21-pin SCART Cable
(not provided)
	Another recorder
	Player
NOTES:

●All necessary cables can be obtained from your dealer.

●For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.

●When you select EDIT to dub tapes in step 4, be sure to select AUTO (or NORM when B.E.S.T. is set to OFF) after you finish dubbing the tapes.

●When you use this recorder as the player for editing, be sure to set "O.S.D." to "OFF" before starting ( pg. 55).

●If you are using another recorder with S-Video and Audio input/output connectors, you can connect those connectors to this recorder's S-VIDEO IN/S OUT and AUDIO IN/OUT connectors.

When Using Your Video Recorder As The Source Player ...

... connect its rear panel S OUT and AUDIO OUT connectors to the recording deck's S-Video and Audio input connectors. When Using Your Video Recorder As The Recording Deck ...

... connect its front panel S-VIDEO and AUDIO input connectors to the source player's S-Video and Audio output connectors. Then, set the recorder's input mode to "F-1" and set "VHS F-1 INPUT" to "S-VIDEO" ( pg. 51).