JVC SR-VS20EK, LPT0543-001A Soundtrack Selection DV Deck, 1Sound Mode Selection DV Deck, Track

35

Soundtrack Selection (DV Deck)

The DV recording deck is capable of recording two soundtracks (L and R) and will play back the one you select.

During Playback

Pressing AUDIO on the remote control changes the soundtrack being played back as follows:

TRACK

On-Screen Display

USE

L R For stereo or Bilingual tapes

L For main audio of Bilingual tapes

R For sub audio of Bilingual tapes

NOTE:

Bilingual programmes are not currently broadcast in the U.K.

1Sound Mode Selection (DV Deck)

2Press MENU to access the Main Menu screen.

3Move the highlight bar (pointer) to "DV MODE SET" by pressing %fi, then press OK or #. Move the highlight bar (pointer) to "SOUND MODE" by pressing %fi, then press OK or # to

4select "12BIT" or "16BIT".

Press MENU to return to the normal screen.

NOTE:

Set "SOUND MODE" to "12BIT" at the original recording on a Mini DV tape, if you wish to perform Audio Dubbing later.

DV MODE SET

SOUND MODE	12BIT
12BIT MODE	SOUND1
AUDIO REC	NICAM
[5∞] =
[MENU] : EXIT

12BIT Mode Setting (Audio-dubbed Mini DV Tape)

2Press MENU to access the Main Menu screen.

3Move the highlight bar (pointer) to "DV MODE SET" by pressing %fi, then press OK or #. Move the highlight bar (pointer) to "12BIT MODE" by pressing %fi, then press OK or # to select

4"SOUND1", "SOUND2" or "FULL SOUND". Press MENU to return to the normal screen.

DV MODE SET

SOUND MODE	12BIT
12BIT MODE	SOUND1
AUDIO REC	NICAM

12BIT MODE	SOUND YOU HEAR
SOUND1	Original recorded sound
SOUND2	Audio-dubbed sound
FULL SOUND	Original recorded sound and
	Audio-dubbed sound

[5∞] = [MENU] : EXIT

NOTES:

When "12BIT MODE" is set to "FULL SOUND":

●For bilingual tapes, both the main and sub audio will be audible.

●To select just the main audio or just the sub audio of Bilingual tapes, set "12BIT MODE" to "SOUND1".